Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-19-2007, 10:12 AM   #1
nismobeyond
 
Join Date: Aug 2007
Location: Calgary, Alberta
Posts: 2
Trader Rating: (0)
nismobeyond is an unknown quantity at this point
Feedback Score: 0 reviews
CA18DET: Stalls, TONS of black smoke

Whats up guys,

Car is an S13 powered by a CA18DET. I have had a fuel injector leaking a little drip of fuel onto the block because of a bad o-ring that I haven't had time to get replaced. I drive the car only once a week anyways so I was planning on getting the o-rings changed sometime soon, just not immediately.

Anyways, last night I am out for a drive and notice a little bit of smoke coming from under the hood, not a big deal, I know it's that little drip of fuel burning up. I drive around 10km more and trouble starts. I notice more smoke coming from under the hood. I check my rear view mirror and the car is literally blowing CLOUDS of black smoke out even at idle. It is just puffing and puffing it out.

I stop the car. I pop the hood and there is tons of smoke coming from the injector that was leaking fuel out of the o-ring. The car starts but does NOT have any power at low RPM. I can barely move it. I had to give it a fair bit of gas just to be able to park it in a proper spot. It stalls SUPER easy if I don't give it tons of gas and even then it moves slowly.

I can understand the smoke under the hood as a result of the o-ring possibly giving up at this point. But why is there TONS of black smoke coming out the rear? Also, why no power at low RPM? It stalls out if I don't give it TONS of gas.

Whats the best thing to do here? I am worried about doing any serious damage to the engine. I know I need to change the rings to fix the leak but now I am curious as to why the car barely wants to move. Does the no power at low rpm give any hint of serious problems?

Any advice/info would be appreciated.
nismobeyond is offline   Reply With Quote
Sponsored Links
 

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net