Suspension install ?'s (spl fca, zeal x's.....)

[camppain]

I tried searching to see if anyone had an install of the spl front arms on their s14. Spl's site only has the tie rod install. I was wondering what all the spacers are for and how to install it correctly. Are the spacers for changing the angle the arm connects to the knuckle when you get an alignment?

Also the tension rods were a very tight fit when it came to trying to get the bolts through due to the steering stop. Is there something that you are supposed to bolt where the steering stop hits? There are two holes on the spl arms that seem you can install some kind of bumper or something?

As for the Largus sway bar I guess all I have to do is angle it up a little bit more to ease the install of the spl endlinks. Anyone certain?

Last is the zeal coilovers, in the picture you can see how I installed them with the bushing towards the knuckle. Just want to make sure that it is the correct way and not needing to be rotated.

You can see the pictures here:

http://www.camppain.com/95_240sx/

Thanks for any info/help.