Really really hard to find Skyline parts... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

opponheimer · 12-10-2007, 06:26 PM

I need to know if any parts below are interchangeable with any USDM parts, and/or if anyone has a connection/hookup and may be able to help me find someone who can locate the following parts.

I don't think this has been touched on, but this thread may be useful for people down the road in the archives..

Doing a R34 GTT Neo Rb25DET swap in an s13 fastback. The drive train utilizes a PULL-Type clutch. My friend bought the motor from drift freaq who supposedly got the motor from a front clip... Surprisingly a few key parts are missing which are disabling us from completing the swap.

- The pin/C-clip combo that holds the clutch fork on the inside of the bell housing for clutch engage/disengagement.
(this would mean that the transmission was removed, and the pin taken off, and I guess lost, by drift freaq or whoever had worked on the engine set.)

- Clutch slave cylinder for the same transmission.

- OEM rb25det shifter.

If anyone can help, I'd greatly, greatly appreciate it, have been looking for a month now, not much luck, a lot of dead leads.

12-10-2007, 06:26 PM	#1
opponheimer Zilvia FREAK! Join Date: Apr 2007 Location: Bikini Atoll Posts: 1,267 Trader Rating: (3) Feedback Score: 3 reviews	Really really hard to find Skyline parts... I need to know if any parts below are interchangeable with any USDM parts, and/or if anyone has a connection/hookup and may be able to help me find someone who can locate the following parts. I don't think this has been touched on, but this thread may be useful for people down the road in the archives.. Doing a R34 GTT Neo Rb25DET swap in an s13 fastback. The drive train utilizes a PULL-Type clutch. My friend bought the motor from drift freaq who supposedly got the motor from a front clip... Surprisingly a few key parts are missing which are disabling us from completing the swap. - The pin/C-clip combo that holds the clutch fork on the inside of the bell housing for clutch engage/disengagement. (this would mean that the transmission was removed, and the pin taken off, and I guess lost, by drift freaq or whoever had worked on the engine set.) - Clutch slave cylinder for the same transmission. - OEM rb25det shifter. If anyone can help, I'd greatly, greatly appreciate it, have been looking for a month now, not much luck, a lot of dead leads. __________________ SR20 & RB20/25/26 in s13/s14 Wiring from $125 to $200.. Best prices EVER.