Z32 Front Brake Setup - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drift into a curb · 04-23-2008, 03:45 AM

Z32 30mm Aluminum Calipers (not from the junkyard, purchased from WorldPac, a distributor for parts).
KVR Carbon Kevlar Pads
Brembo Rotors (Also purchased from WorldPac, I painted the rotor hats high temp black so in case the coating came off.
Baker Precision Stainless Braided Brake Lines

Has about 8000 miles on it if even that. My car is constantly in the garage for new stuff, so it hasn't seen the road much. One of the calipers has the nissan letters shaved and a bit of oxidation, but nothing a wire brush and high temp paint won't fix =)

$400 picked up or $450 shipped. If you're local in Anaheim, CA, I'll install it for you for $60 bucks. Contact me at [email protected]

Top view

Pad on the outside and rotor on the inside.

Seals are good

Oxidizing on surface of the driverside caliper (just needs some caliper paint)

04-23-2008, 03:45 AM	#1
drift into a curb Post Whore! Join Date: Mar 2002 Location: Seoul, South Korea Posts: 2,870 Trader Rating: (5) Feedback Score: 5 reviews	Z32 Front Brake Setup Z32 30mm Aluminum Calipers (not from the junkyard, purchased from WorldPac, a distributor for parts). KVR Carbon Kevlar Pads Brembo Rotors (Also purchased from WorldPac, I painted the rotor hats high temp black so in case the coating came off. Baker Precision Stainless Braided Brake Lines Has about 8000 miles on it if even that. My car is constantly in the garage for new stuff, so it hasn't seen the road much. One of the calipers has the nissan letters shaved and a bit of oxidation, but nothing a wire brush and high temp paint won't fix =) $400 picked up or $450 shipped. If you're local in Anaheim, CA, I'll install it for you for $60 bucks. Contact me at [email protected] Top view Pad on the outside and rotor on the inside. Seals are good Oxidizing on surface of the driverside caliper (just needs some caliper paint) __________________ Go big or go home! Last edited by drift into a curb; 05-04-2008 at 04:00 PM..