camber kits - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

d240t2 · 02-20-2003, 11:22 AM

You'll need to pull the upper control arms off, burn the bushings out, cut out the metal sleeves, and then press the new bushings in. It isn't for the faint of heart...and takes a good bit of time.

While you are doing it...you may want to get a full set of suspension bushings...then find a spare set of suspension members...and work on those without taking the car apart.

Dennis

02-20-2003, 11:22 AM	#4
d240t2 Zilvia Member Join Date: Mar 2002 Location: Atlanta, GA Age: 44 Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	You'll need to pull the upper control arms off, burn the bushings out, cut out the metal sleeves, and then press the new bushings in. It isn't for the faint of heart...and takes a good bit of time. While you are doing it...you may want to get a full set of suspension bushings...then find a spare set of suspension members...and work on those without taking the car apart. Dennis