z32 brake upgrade assistance - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

asobanai · 06-24-2008, 01:04 AM

s14 - i have managed to install the calipers and rotors sucessfully, however i noticed that the brake balance was much more in the front than the rear. i would brake and my rear end locks right up. i just put the bnr33 vlsd and it was a little much, i would imagine if i did the rears as well it will equalize the brake balance. Your opinion or knowledge? im thinking of getting some drilled and slotted rotors temporarily until i can get the rear brakes/calipers/spindles in the future. then again there is the brake booster and master cylinder from the z32 as a brake performance factor. aluminum 30mm they are, any words advice are appreciated.

06-24-2008, 01:04 AM	#1
asobanai Join Date: Jan 2008 Location: Los Angeles Age: 38 Posts: 30 Trader Rating: (1) Feedback Score: 1 reviews	z32 brake upgrade assistance s14 - i have managed to install the calipers and rotors sucessfully, however i noticed that the brake balance was much more in the front than the rear. i would brake and my rear end locks right up. i just put the bnr33 vlsd and it was a little much, i would imagine if i did the rears as well it will equalize the brake balance. Your opinion or knowledge? im thinking of getting some drilled and slotted rotors temporarily until i can get the rear brakes/calipers/spindles in the future. then again there is the brake booster and master cylinder from the z32 as a brake performance factor. aluminum 30mm they are, any words advice are appreciated. Last edited by asobanai; 06-24-2008 at 01:06 AM.. Reason: sleepy