Red Zenki/built SR/Car PC - needs to go!

[jaytv1019]

Hey guys, the time has come to move on to the next project. I was going to wait until the end of the season to sell her but I came across a real nice deal on something and can't pass it up. The only problem is that I cannot afford them both - so unfortunatel my girl Sil has to go.

There is well over $30K in parts/labor/etc and I have listed her for sale before (low $20Ks) but was never serious about selling her. Well now I am, so I am listing her for $15K which I am very firm on. Not saying I wouldn't take offers but for everything this car has, I (of course I do) think it's a steal.

Location - Chicagoland area
Price - $15,000

History, I did build this my self from the ground up. The engine currently has ~4500 miles since rebuild and it runs like a champ. I did have a problem with what I thought was the headgasket a couple months back but I re-torqued the headstuds and the problem hasn't been back since. I am not going to say I babied the car but I most definitely didn't beat on it. She was drivin hard and only launched once. She has scene no drag strips and only one auto-x. The car is tuned perfectly with a rom tune (11.5s across the board) and doesn't stall, miss, hiickup , or anything. The throwout bearing has a little whine to it but the trans shifts perfect with no grinding. The windsheild is cracked but not bad (will replace with sale) and the paint is a 8/10. The hood is not painted and the dash has one crack in it on the steering column.

I am a real honest guy and will tell you anything you want to know, good or bad. I hate to see her go but gotta make room for her bigger brother

Brake/suspension/wheels -
Z32 front calipers
5-lug conversion
ES master bushing kit
KYB adjustable shocks
Eibach prokit springs
SS brake lines
Sportmax 5 spoke 17 x 7.5 front 17 x 8.5 with 3" lip rear
Kumo 235/45/17
1.5" spacer in front
1" spacer in rear
New ball joints


Interior/electronics-
Brand new carpet, grey
New interior pieces
8.5" monitor molded into dash for CarPC
MCS 1.8 gig processor with 120GB hard drive
Nissan datascan consult program (used as engine diagnosis and gauges)
Innovative WBO2 sensor, gauge viewed on computer
Autometer silver boost gauge and oil pressure gauge
Custom fiberglass gauge pod in door for boost gauge
1 10" RF sub in custom fiberglass enclosure
Focal 6.5" component speakers in front
Alpine 5 channel amplifier
Touch pad for computer controll in steering wheel (this is awsome!)
Rotory system volume controll
Battery mounted in trunk with 0 gauge wiring and circuit breakers
SAFC NEO for fine tuning
Enthalpy rom tune (OEM ECU)

Body/chasis-
Fresh Nissan red paint
Knock off/remade fiberglass body kit
Silvia bages
Silvia grill
Unpainted fiberglass hood
Silvia fiberglass replica OEM wing
Silvia rain gaurds

Engine -
Full Race Twin Scroll kit w/GT3071r v-band
Apexi N1 Exhaust, resonated test pipe (super quite @ idle)
Z32 MAF
Q45 igintor
eBay lightend pulley kit
740 cc injectors on top feed fuel rail
Aeromotive FPR
Greddy FMIC
Greddy RAS
Greddy Intake manifold
Tial 50mm bov
Tial 44mm v-band wastegate
Custom catch can/coolant overflow setup
Koyo radiator
B&M short shifter
Spec Stage III clutch (good to over 500 whp)
J30 (infinity LSD)
Brain Crower valve springs
OEM retainers
Brain Crower 264* Stage I camshafts
Mahle treated .20 over 86.5mm 8.5:1 CR pistons
OEM connecting rods
Tomei 1.5mm metal head gasket
ARP head studs
ARP rod bolts
ARP main studs
OEM water pump
OEM oil pump/front cover
OEM clutch slave
OEM EVERY GASKET & SEAL NEW
ARC over sized oil pan
Heat wrap on downpipe, turbo lines, intake pipe
All vaccum lines are stainless steel braided with red/black hose ends
All fluid lines are stainless steel braided with silver/black hose ends
All intercooler piping powdercoated "smoked chrome"
Intake manifold powdercoated "flat black"
Two tone valve cover "mirror red" and lettering "flat black" with clear coat
Engine bay painted textured flat black high temp