Quote:
Originally Posted by Gorilla Unit 33
the 5 watt LX5 series bulbs. YES they are expensive, somwhere arround $30 a bulb. I use dual intensity red ones for my brake lights and single intensity white ones for the tun signals. THERE BRIGHT, im going to have to take a picture of the car with the flashers and brakes on to show you i guess. No modification for anything. Unless hyper flashing turnsignals bother you then all you need to do is wire in something like a resistor that takes it slower to flash and thats simple. Another thing that helps is if you take the reflectors on the lighting panel and bend them so the curve is wider with will help spread the light through the housing, but these LED's are already a wide output with a 180 degree beam.
|
Not to be a dick at this point, but if the LED bulb sits in FRONT of the reflector and has a 180 degree beam, it's not going to directly illuminate the reflector behind it. Simple logic.
12-04-2008, 05:50 PM
Threaded Mode