anoder sr swap fuel pump not working - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*wangan_cruiser* · 07-10-2009, 01:59 PM

i finished my swap and ready to fire her up.

but i cranked it didnt start.

then i checked the fuel lines first if im getting fuel. no pressure. no fuel when i pulled the hoses.

so i went back to the inside and turn the ign key on to listen if the fuel pump is priming. no response

double checked the harness i cut and splice located from the side of the battery.

i spliced them one by one carefully so i wont mixed things up.

then double checked the clip from the back where the fuel pump is connect for voltage and it has one.

now im stumped and dont know where to look.

anyone can help me?

07-10-2009, 01:59 PM	#1
wangan_cruiser kouki man Join Date: Apr 2006 Location: downtown oakland,ca Age: 40 Posts: 3,539 Trader Rating: (36) Feedback Score: 36 reviews	anoder sr swap fuel pump not working i finished my swap and ready to fire her up. but i cranked it didnt start. then i checked the fuel lines first if im getting fuel. no pressure. no fuel when i pulled the hoses. so i went back to the inside and turn the ign key on to listen if the fuel pump is priming. no response double checked the harness i cut and splice located from the side of the battery. i spliced them one by one carefully so i wont mixed things up. then double checked the clip from the back where the fuel pump is connect for voltage and it has one. now im stumped and dont know where to look. anyone can help me?