in your opinion rb25 100amp fuse problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Silviaoneday · 09-12-2009, 06:19 PM

Hey guys,

Well I have a s14 with an rb25, I recently installed a new timing belt, exhaust manifold gasket, and a t3 flange gasket. I had the alternator polished now I have a PROBLEM, the car will not make it down the street without blowing the 100 amp main fuse. Ive replaced the fuse 3 times today, checked the wires going to the back of the alternator and made sure they werent grounding.... Other then the timing belt being a little tight I'm lost... Any ideas!!

All that I have touched:

1. Cam angle sensor/ but you cant screw plugging it in up
2. Turbo/ self explanitory
3. Alternator,??

THANKS!!

09-12-2009, 06:19 PM	#1
Silviaoneday Zilvia Junkie Join Date: Dec 2007 Location: So Cal Posts: 472 Trader Rating: (9) Feedback Score: 9 reviews	in your opinion rb25 100amp fuse problem Hey guys, Well I have a s14 with an rb25, I recently installed a new timing belt, exhaust manifold gasket, and a t3 flange gasket. I had the alternator polished now I have a PROBLEM, the car will not make it down the street without blowing the 100 amp main fuse. Ive replaced the fuse 3 times today, checked the wires going to the back of the alternator and made sure they werent grounding.... Other then the timing belt being a little tight I'm lost... Any ideas!! All that I have touched: 1. Cam angle sensor/ but you cant screw plugging it in up 2. Turbo/ self explanitory 3. Alternator,?? THANKS!!