Stupid People Cause Cancer - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DMC · 09-09-2003, 06:22 PM

Hey guys awhile ago i posted about my 240sx fastback that i was trying to "restore" well heres the update.

I removed all of the interior panels hte dash the automatic seatbelts the carpet and the roofliner and this guy put white vinyl sound proofing EVERYWHERE under the carpet under th roof lining he even filled up behind the front FENDER! Im not sure why. He aslo had wood screws all over the trunk and sides of the interior. I am currently in the process of removing the fenders, bumpers, white vinyle, wood screw, the custom made sub box(he cut into the car and put it in the wall slopely),the spray in foam, and the support behind the dash.

MORE BAD NEWS
I was starting to remove the fender today when i noticed a gaping whole in the car form the bottom rite in front of the rigght rear tire. My assumption is he jacked it up on this point with a normal jack you have around your house(not the one with the car) and it eventually broke threw and rusted. Its horrible! I think i need to grind off the entire piece(it goes into the car) adn replace it. Any SUGGESTIONS would be helpful. Also there is some rust holes in the spare tire holder.

Good News
-Matt(boostin) gave me a free dash with hud, free froont seats and free non power seatbelts!
-Matt(mbmbmb) gave me free front and rear seats!
-I almost got the fenders and bumper off in which i just have to knock out a few dents and repair the bumper then primer them all!
-I am planning to put in doors with all power options

As for the SR
THe engine is wating for me to drop the crank then im going to have the block and head boiled(or whatever chemical they use) I am going to have the pistons polished, then i plan to port out the head as well as manifolds and replace all seals and rings, and repaint the valve cover.

After which i will buy an fmic, boost controller , ecu and wiring harness and drop it in the car!

09-09-2003, 06:22 PM	#1
DMC Zilvia Addict Join Date: Jan 2003 Location: Chesapeake, Va Posts: 609 Trader Rating: (0) Feedback Score: 0 reviews	Stupid People Cause Cancer Hey guys awhile ago i posted about my 240sx fastback that i was trying to "restore" well heres the update. I removed all of the interior panels hte dash the automatic seatbelts the carpet and the roofliner and this guy put white vinyl sound proofing EVERYWHERE under the carpet under th roof lining he even filled up behind the front FENDER! Im not sure why. He aslo had wood screws all over the trunk and sides of the interior. I am currently in the process of removing the fenders, bumpers, white vinyle, wood screw, the custom made sub box(he cut into the car and put it in the wall slopely),the spray in foam, and the support behind the dash. MORE BAD NEWS I was starting to remove the fender today when i noticed a gaping whole in the car form the bottom rite in front of the rigght rear tire. My assumption is he jacked it up on this point with a normal jack you have around your house(not the one with the car) and it eventually broke threw and rusted. Its horrible! I think i need to grind off the entire piece(it goes into the car) adn replace it. Any SUGGESTIONS would be helpful. Also there is some rust holes in the spare tire holder. Good News -Matt(boostin) gave me a free dash with hud, free froont seats and free non power seatbelts! -Matt(mbmbmb) gave me free front and rear seats! -I almost got the fenders and bumper off in which i just have to knock out a few dents and repair the bumper then primer them all! -I am planning to put in doors with all power options As for the SR THe engine is wating for me to drop the crank then im going to have the block and head boiled(or whatever chemical they use) I am going to have the pistons polished, then i plan to port out the head as well as manifolds and replace all seals and rings, and repaint the valve cover. After which i will buy an fmic, boost controller , ecu and wiring harness and drop it in the car!