Pulling an sr20 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

90hatchie · 01-31-2010, 06:15 PM

yea to take it out pull the shift boots off and you will need a C clip remover (can be bought at sears) or u can use some needle nose pliers
after the clip is out pull shifter up and out then stuff a CLEAN rag into the hole
and PULLLLLLLLLLL motor out
i did pulled my ka24de out out of boredem cuz it has knock was my first time pulling and i just disconnected everything double checked all hoses and what not and it came up and out

01-31-2010, 06:15 PM	#12
90hatchie Banned from the Marketplace Join Date: Dec 2006 Location: yorktown hts ny Age: 36 Posts: 2,984 Trader Rating: (15) Feedback Score: 15 reviews	yea to take it out pull the shift boots off and you will need a C clip remover (can be bought at sears) or u can use some needle nose pliers after the clip is out pull shifter up and out then stuff a CLEAN rag into the hole and PULLLLLLLLLLL motor out i did pulled my ka24de out out of boredem cuz it has knock was my first time pulling and i just disconnected everything double checked all hoses and what not and it came up and out