CA HID retrofit setup - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MrMcgarrett · 04-23-2010, 10:48 AM

These are REAL HID lights. No Ebay junk.
Set up is complete.
-Valeo Xenon projectors
-Philips ballast
-Philips D2R bulbs
-Pre-wired Harness

The harness has a HB4 plug(J30, Z32) that can be easily switched out for any application.
The projectors have 2.5in lenses.
One lens has a small nick.
The projectors measure 3.5in high, 4in wide, and 6in long from the lens to the bulb plug.
Easy to hook up after retrofitting the projectors.
Just bolt down the ballast ground wires, hook the power cable up to the positive battery terminal, then plug in one of your headlight plugs to turn them on and off.

$265 shipped
Price is FIRM
Not parting out

My truck uses HB4 plugs so I hooked them up to it to show they work.
The projectors were just sitting on the core support so the light is all crooked.

04-23-2010, 10:48 AM	#1
MrMcgarrett Post Whore! Join Date: Sep 2006 Location: Pomona, CA Age: 43 Posts: 5,591 Trader Rating: (313) Feedback Score: 313 reviews	HID retrofit setup These are REAL HID lights. No Ebay junk. Set up is complete. -Valeo Xenon projectors -Philips ballast -Philips D2R bulbs -Pre-wired Harness The harness has a HB4 plug(J30, Z32) that can be easily switched out for any application. The projectors have 2.5in lenses. One lens has a small nick. The projectors measure 3.5in high, 4in wide, and 6in long from the lens to the bulb plug. Easy to hook up after retrofitting the projectors. Just bolt down the ballast ground wires, hook the power cable up to the positive battery terminal, then plug in one of your headlight plugs to turn them on and off. $265 shipped Price is FIRM Not parting out My truck uses HB4 plugs so I hooked them up to it to show they work. The projectors were just sitting on the core support so the light is all crooked.