A few questions about a complete rewire.. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mr. white · 01-08-2011, 10:47 PM

So, I've spent the last 5 hours researching complete rewires on the S-Chassis. I've gather and understood the fuse panel concept and relays concept.

I'm dilly-dallying with the idea of rewiring my car since the previous owner fubar'd most of the wiring on the car. I plan on keeping most almost all accessories except for A/C, Windshield washer, Side markers, and maybe my horn (aftermarket steering wheel doesn't co-operate). I'm still going through the circuits trying to fully understand how it will work.

The reason this post is the S.M.J. and the connectors. The s13 has the connectors for the chassis harness, which is where most of the wiring is going to be redone, to the Dash harness. I don't think this would be much of a problem if I weren't trying to keep the HVAC setup for defrost on the car and heat. How would I be able to incorporate the HVAC into the rest of this setup I'm planning to run, is there some way I can wire the connectors to my custom circuit? Is the S.M.J. going to be eliminated by doing this as well?

01-08-2011, 10:47 PM	#1
Mr. white Leaky Injector Join Date: May 2010 Location: Raleigh Age: 35 Posts: 93 Trader Rating: (0) Feedback Score: 0 reviews	A few questions about a complete rewire.. So, I've spent the last 5 hours researching complete rewires on the S-Chassis. I've gather and understood the fuse panel concept and relays concept. I'm dilly-dallying with the idea of rewiring my car since the previous owner fubar'd most of the wiring on the car. I plan on keeping most almost all accessories except for A/C, Windshield washer, Side markers, and maybe my horn (aftermarket steering wheel doesn't co-operate). I'm still going through the circuits trying to fully understand how it will work. The reason this post is the S.M.J. and the connectors. The s13 has the connectors for the chassis harness, which is where most of the wiring is going to be redone, to the Dash harness. I don't think this would be much of a problem if I weren't trying to keep the HVAC setup for defrost on the car and heat. How would I be able to incorporate the HVAC into the rest of this setup I'm planning to run, is there some way I can wire the connectors to my custom circuit? Is the S.M.J. going to be eliminated by doing this as well?