OK !!!!!Built Head Block and more Cheap!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TOMEI GUY-S13 · 04-24-2011, 01:47 PM

I have a completely stock empty block ready to be machined. Its an s14 block and comes with all 5 main caps and main gridle. And i have a completely built S14 Head. The head is complete and ready to bolt on. Here are the details on the head....

Internals include:
HKS 264 Step 2 cams(made for S14 to retain VCT)
KMS titanium Retainers
SI Industry 21-4n stainless steel valves
SI Industry Viton valve stem seals
SI Industry manganese bronze valve guides
Comp valve springs
Cam oiler tubes
Cam caps
Rocker Arms
Port and polished Intake and Exhaust Ports.
All shims are on and been shimmed to the factory spec of .001"
The head has been decked .003"
It has a 3 angle valve job with 45* seating angle, and the exhaust valves have been converted from 7mm to 6mm to lighten the valvetrain and provide better flow.

The head has been flow tested to increase flow by 15% on the exhaust side and 12% on the intake side.

Comes with everything including camgears vct gear, vct solenoid and s14 water neck.

Starting price is 1200 OBO SHIPPED.

AND I HAVE A FEW LITTLE THINGS AS WELL

S14 6 BOLT AXLE 40 BUCKS

S14 SR INTAKE MANIFOLD 30 BUCKS

RS-R LOWERING SPRINGS 80 BUCKS

S13 P.S RACK 100 BUCKS SHIPPED

S13 INNER/OUTER TIERODS 30 BUCKS

04-24-2011, 01:47 PM	#1
TOMEI GUY-S13 Banned from the Marketplace Join Date: Nov 2010 Location: Tulsa, Ok Age: 35 Posts: 96 Trader Rating: (1) Feedback Score: 1 reviews	Built head!!!! 140oshipped and more I have a completely stock empty block ready to be machined. Its an s14 block and comes with all 5 main caps and main gridle. And i have a completely built S14 Head. The head is complete and ready to bolt on. Here are the details on the head.... Internals include: HKS 264 Step 2 cams(made for S14 to retain VCT) KMS titanium Retainers SI Industry 21-4n stainless steel valves SI Industry Viton valve stem seals SI Industry manganese bronze valve guides Comp valve springs Cam oiler tubes Cam caps Rocker Arms Port and polished Intake and Exhaust Ports. All shims are on and been shimmed to the factory spec of .001" The head has been decked .003" It has a 3 angle valve job with 45* seating angle, and the exhaust valves have been converted from 7mm to 6mm to lighten the valvetrain and provide better flow. The head has been flow tested to increase flow by 15% on the exhaust side and 12% on the intake side. Comes with everything including camgears vct gear, vct solenoid and s14 water neck. Starting price is 1200 OBO SHIPPED. AND I HAVE A FEW LITTLE THINGS AS WELL S14 6 BOLT AXLE 40 BUCKS S14 SR INTAKE MANIFOLD 30 BUCKS RS-R LOWERING SPRINGS 80 BUCKS S13 P.S RACK 100 BUCKS SHIPPED S13 INNER/OUTER TIERODS 30 BUCKS Last edited by TOMEI GUY-S13; 05-05-2011 at 03:01 PM..