CA Rb25 86mm Cp pistons and Eagle rods - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ariansworld · 08-31-2011, 04:41 PM

Lmk if you're interested (951) 479-6414 Anthony

Selling my 86mm (standard size) Cp pistons with everything needed and eagle rods from my Rb25det. These are in very mint condition and have less then 100 miles on them do to spinning two bearings. I ordered two new Eagle rods since the other two that spun bearings warped, numbers 2 and 5 spun. The two that I ordered from Eagle rods, the guy asked me to weigh them so they can match the weight of the other four rods I have. So I took the four used rods I have to the post office where they weighed them. They were taken off and marked so that they would be installed the same way. $900 for everything. Thanks for looking.

The two new rods are on the far right.

08-31-2011, 04:41 PM	#1
ariansworld Zilvia FREAK! Join Date: Dec 2008 Location: CoRoNa, CA 92882 Age: 35 Posts: 1,367 Trader Rating: (54) Feedback Score: 54 reviews	Rb25 86mm Cp pistons and Eagle rods Lmk if you're interested (951) 479-6414 Anthony Selling my 86mm (standard size) Cp pistons with everything needed and eagle rods from my Rb25det. These are in very mint condition and have less then 100 miles on them do to spinning two bearings. I ordered two new Eagle rods since the other two that spun bearings warped, numbers 2 and 5 spun. The two that I ordered from Eagle rods, the guy asked me to weigh them so they can match the weight of the other four rods I have. So I took the four used rods I have to the post office where they weighed them. They were taken off and marked so that they would be installed the same way. $900 for everything. Thanks for looking. The two new rods are on the far right. Last edited by ariansworld; 09-01-2011 at 01:20 PM..