NY Hks/greddy/tomei/nismo parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

CC200SX · 10-07-2011, 05:36 AM

CA18DET - Sold
HKS CAMS - 400 $ USD
ADMISSÃO - 256 º - LIFT 8.8 mm

LOCKING COLLARS - S13 - 45 $USD

STEERINH DISK - 35 $USD Sold

SONDA LAMBDA BOSH OEM 1000KM DE USO - 80$USD

APEXPERFORMANCE SHORT SHIFTER - 500KM DE USO - 90 $USD

INTAKE PIPE WITH SAMCO E GREDDY PLUS ADAPTER FOR 4 " FILTER - 80$USD

CA18DET 560CC E CHIP TURBONOZ (THE STICKER IN THE CHIP IS MINE)- 140$USD the injectors + chip.Chip sold

ROLLER FENDER - 300$USD

WHITE SIDE TURNING LIGHTS- S13

NISMO CLUTCH SLAVE CYLINDER and SS line - 300$USD shipped to US

EXHAUST SUPORT HANGER NEAR CAT

BLEED VALVE

T3 to T2/T25/T28 inlet turbo adapter

Its a T3 to T2/t25/t28 inlet turbo adapter.
This is not to be welded, unless you want.
The purpose is to bolt in both sides.
in both sides it as M8 threads.
The thickness is 19mm.
These plate was laser cut with a CNC machined taper for a uniform transition to the smaller inlet size. This is a two plate adapter that will bolt to a T3 turbo manifold flange and adapts for the T2/T25/T28 flange turbo or vice versa.
It was custom made imported from Australia, and the price is 100€

10-07-2011, 05:36 AM	#1
CC200SX Zilvia Member Join Date: Dec 2007 Location: Portugal Posts: 153 Trader Rating: (2) Feedback Score: 2 reviews	Hks/greddy/tomei/nismo parts CA18DET - *Sold* HKS CAMS - 400 $ USD ADMISSÃO - 256 º - LIFT 8.8 mm LOCKING COLLARS - S13 - 45 $USD STEERINH DISK - 35 $USD *Sold* SONDA LAMBDA BOSH OEM 1000KM DE USO - 80$USD APEXPERFORMANCE SHORT SHIFTER - 500KM DE USO - 90 $USD INTAKE PIPE WITH SAMCO E GREDDY PLUS ADAPTER FOR 4 " FILTER - 80$USD CA18DET 560CC E CHIP TURBONOZ (THE STICKER IN THE CHIP IS MINE)- 140$USD the injectors + chip.Chip sold ROLLER FENDER - 300$USD WHITE SIDE TURNING LIGHTS- S13 NISMO CLUTCH SLAVE CYLINDER and SS line - 300$USD shipped to US EXHAUST SUPORT HANGER NEAR CAT BLEED VALVE T3 to T2/T25/T28 inlet turbo adapter Its a T3 to T2/t25/t28 inlet turbo adapter. This is not to be welded, unless you want. The purpose is to bolt in both sides. in both sides it as M8 threads. The thickness is 19mm. These plate was laser cut with a CNC machined taper for a uniform transition to the smaller inlet size. This is a two plate adapter that will bolt to a T3 turbo manifold flange and adapts for the T2/T25/T28 flange turbo or vice versa. It was custom made imported from Australia, and the price is 100€ Last edited by CC200SX; 10-20-2011 at 05:56 AM..