Pathfinder 4.6 final drive in a s13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Southern Elegance · 02-29-2012, 02:03 PM

Well I've been trying to research and I just seem to get more confused since majority of people haven't actually installed it just posting what they think. So I just want to get a straight answer on this subject.(Is the r&p a direct swap???)The main concern I have is if the stock output shafts will work since the pathfinder is 31 or 33 spline and I think 240s are 30 so I need someone to verify that info. I plan on swapping a 4.6 from a early 90's pathfinder in just needing some extra info on this subject ( ring gear bolts 12/13 mm???). some models came with the 4.3 and only the front diff is a r200 model so you have to go by vin number if you want the 4.6.

Also wanted to know if you can use the stock s13 shims?

02-29-2012, 02:03 PM	#1
Southern Elegance Zilvia Junkie Join Date: Aug 2011 Location: Texas!!! Posts: 372 Trader Rating: (8) Feedback Score: 8 reviews	Pathfinder 4.6 final drive in a s13 Well I've been trying to research and I just seem to get more confused since majority of people haven't actually installed it just posting what they think. So I just want to get a straight answer on this subject.(Is the r&p a direct swap???)The main concern I have is if the stock output shafts will work since the pathfinder is 31 or 33 spline and I think 240s are 30 so I need someone to verify that info. I plan on swapping a 4.6 from a early 90's pathfinder in just needing some extra info on this subject ( ring gear bolts 12/13 mm???). some models came with the 4.3 and only the front diff is a r200 model so you have to go by vin number if you want the 4.6. Also wanted to know if you can use the stock s13 shims?