pdm control arm - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NinjaGaiden · 05-21-2004, 01:59 PM

anotehr hint is you might want to make it easier on yourself by removing hte calipers, rotors and hubs first, so it is lighter and easier to hold up into place.

if your tension rod is already installed, u can take it off and just put the control arm in first with the tie rod attached to remove all that stuff. hopet his helps. I knwo what you mean, i was stumped at how i was going to get it lined up, but using the jack really helped me

05-21-2004, 01:59 PM	#5
NinjaGaiden Zilvia Junkie Join Date: Aug 2003 Location: Portland, Orygun Posts: 480 Trader Rating: (0) Feedback Score: 0 reviews	anotehr hint is you might want to make it easier on yourself by removing hte calipers, rotors and hubs first, so it is lighter and easier to hold up into place. if your tension rod is already installed, u can take it off and just put the control arm in first with the tie rod attached to remove all that stuff. hopet his helps. I knwo what you mean, i was stumped at how i was going to get it lined up, but using the jack really helped me __________________