AZ Sr Madness!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

FutureFab · 06-29-2012, 12:14 AM

Whats listed is parts left that are available.

Was trying to sell complete sr swap locally but no ones interested, so part out it is!

Found a buyer for long block, turbo and intake manifold, so everything else must go!

Keeping the intercooler tho.

2871r T25 flanged turbo. 3 inch compressor inlet. Has .86 5 bolt exhaust housing, adjustable actuator, spins free long after motor is shut off. Ran on 14psi. Sold
[IMG]http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/1BFA01C7-orig.jpg[/MIG]

720cc top feed denso injectors in working order, with resistor pack, 200

Jwt top feed fuel rail, has dual fuel entry on both sides of rail for more even feeding to injectors, center return, 50

An dual fuel lines with Y fitting, center return, all -6an 50

New in bag intake and exhaust valve stem seals for Sr20det redtop. 20

Stainless divided down pipe, wg tube is smashed in to clear moved forward rack/steering shaft. 40

E5 tuned ecu for s13 red and black tops. Tuned for 2871, 720cc, z32 maf. 350

Stock sr exhaust manifold, lightly ported, sold

Stainless turbo lines, -6an coolant, -3 oil feed, sold

Alum 3 inch turbo intake pipe 40

Z32 Maf sold

sr clutch slave, new 1 month ago, aluminum too, 10

Act 6 puck sprung clutch/pressure plate, never slipped, looks really good. Sold

Pad thickness measures .309"

S13 stock 5 speed drive shaft w/new center bolts, 50

sr ignitor 50

sr engine wire harness, was running on painless so not plug and play, but supppper easy to wire. 150

sr alternator bracket, 20

sr billit alum silver water pump pulley, 20

sr Iacv 20

sr stock t25 turbo. spins fine, normal small shaft play. working until upgraded to 2871. sold

Probably more later as the parts come off.

All prices before shipping and paypal fee.

06-29-2012, 12:14 AM	#1
FutureFab Zilvia Member Join Date: Nov 2011 Location: PHX Posts: 276 Trader Rating: (32) Feedback Score: 32 reviews	Sr Madness!! Whats listed is parts left that are available. Was trying to sell complete sr swap locally but no ones interested, so part out it is! Found a buyer for long block, turbo and intake manifold, so everything else must go! Keeping the intercooler tho. 2871r T25 flanged turbo. 3 inch compressor inlet. Has .86 5 bolt exhaust housing, adjustable actuator, spins free long after motor is shut off. Ran on 14psi. Sold [IMG]http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/1BFA01C7-orig.jpg[/MIG] 720cc top feed denso injectors in working order, with resistor pack, 200 Jwt top feed fuel rail, has dual fuel entry on both sides of rail for more even feeding to injectors, center return, 50 An dual fuel lines with Y fitting, center return, all -6an 50 New in bag intake and exhaust valve stem seals for Sr20det redtop. 20 Stainless divided down pipe, wg tube is smashed in to clear moved forward rack/steering shaft. 40 E5 tuned ecu for s13 red and black tops. Tuned for 2871, 720cc, z32 maf. 350 Stock sr exhaust manifold, lightly ported, sold Stainless turbo lines, -6an coolant, -3 oil feed, sold Alum 3 inch turbo intake pipe 40 Z32 Maf sold sr clutch slave, new 1 month ago, aluminum too, 10 Act 6 puck sprung clutch/pressure plate, never slipped, looks really good. Sold Pad thickness measures .309" S13 stock 5 speed drive shaft w/new center bolts, 50 sr ignitor 50 sr engine wire harness, was running on painless so not plug and play, but supppper easy to wire. 150 sr alternator bracket, 20 sr billit alum silver water pump pulley, 20 sr Iacv 20 sr stock t25 turbo. spins fine, normal small shaft play. working until upgraded to 2871. sold Probably more later as the parts come off. All prices before shipping and paypal fee. __________________ futurefabrication.com Last edited by FutureFab; 07-17-2012 at 10:23 PM..