OBX RB25DET Turbo Elbow fitment

[mantas]

Well this is not a question just a statement perhaps. I hope this helps out some other fellow rb owners who have steering column fitment problems when doing the rb to s14 swap.

I have my engine (rb25det) mounted on an r33 crossmember into an s14. I had the typical column clearance issues and ended up grinding down the stock elbow. Due to a major leak at the flange i had to change my elbow and got the obx ebay elbow. It has about 1/2" of clearance from the steering column but i did have to widen some of the holes to make this thing align. Hope this helps anyone that needs info on these elbows. I searched for hours and didnt find any input on the fitment or performance of these things. I know the other ebay elbows do not fit and need mods but this thing is like a glow minus the holes lol. If anyone needs more info pm or post here.


Untitled by onedolla99cents, on Flickr


Untitled by onedolla99cents, on Flickr


Untitled by onedolla99cents, on Flickr


Untitled by onedolla99cents, on Flickr


Untitled by onedolla99cents, on Flickr


Untitled by onedolla99cents, on Flickr


Untitled by onedolla99cents, on Flickr


Untitled by onedolla99cents, on Flickr


Untitled by onedolla99cents, on Flickr