Priming a turbo - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rednerd · 08-05-2004, 02:32 PM

According to the pre-oiling instructions that came with my Garrett:
-Fill the oil inlet and spin the turbine
-Make sure your oil filter is primed if you changed it.
-Disable your ignition system and crank the engine for 10 - 15 seconds to make sure the oil pump is up to full pressure and the oil light is out.
-Start the car and let it idle for 3 - 4 minutes.

08-05-2004, 02:32 PM	#2
rednerd Zilvia Member Join Date: Aug 2003 Location: Massachusetts Posts: 180 Trader Rating: (0) Feedback Score: 0 reviews	According to the pre-oiling instructions that came with my Garrett: -Fill the oil inlet and spin the turbine -Make sure your oil filter is primed if you changed it. -Disable your ignition system and crank the engine for 10 - 15 seconds to make sure the oil pump is up to full pressure and the oil light is out. -Start the car and let it idle for 3 - 4 minutes.