how should i go about my swap??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

PSI240SX · 09-05-2004, 05:48 PM

don't forget about your heater hoses. and your egr tube as well. As for hooking the motor, I just use one of the many threaded holes in the sides of the head and block. usually the upper chain I hook to the head near the distributor, and the lower one I hook to a hole down by the starter. Just use and long 14mm bolt you have lying around, put it through the chain and screw it in to an open hole.

09-05-2004, 05:48 PM	#4
PSI240SX Zilvia Addict Join Date: Jul 2001 Location: The Gunshine State Age: 50 Posts: 843 Trader Rating: (0) Feedback Score: 0 reviews	don't forget about your heater hoses. and your egr tube as well. As for hooking the motor, I just use one of the many threaded holes in the sides of the head and block. usually the upper chain I hook to the head near the distributor, and the lower one I hook to a hole down by the starter. Just use and long 14mm bolt you have lying around, put it through the chain and screw it in to an open hole. __________________ www.enjukuracing.com