FL SR20DET Solid lifter head 90mm

[EatRice]

Hey guys, like the title says - guess im gona start at $2300 obo

s13 SR Head - Currently on motor and running -
Mazworx built 90mm head. BUILT BUILT BUILT
Run for about 10,000 miles. Solid lifter 280 Tomei setup
1/2" Head Studs - Full port and polish bowl Job ect
Freshly Shimmed -

Some specs from the invoice-

Supertech Dual Valve Springs,
Supertech Titanium Retainers,
Supertech Inner Spring Locator, 7mm Valve,
Supertech Inner Spring Locator, 6mm Valve,
Supertech Nissan 6mm Exh guide,
Mang. Bronze (for replacement of 7mm guide)
Supertech Valve Guide Intake Nissan SR20DET/RB26
6 mm stem Manganese Bronze
Exhaust Valve Stem Seal, SR20DET w/ 6mm
Supertech Intake Valve Stem Seal, SR20
Supertech Intake Valve, +1mm,
Supertech Inconel Exhaust Valve, +1mm,
Tomei Solid Pivot Kit
Tomei Solid Type Camshaft, 280, 12.5 Intake,
Tomei Solid Type Camshaft, 280, 12.5, Exhaust, S13 260.00 260.00
Clean and R/R Oil Ports
Mazworx CNC Street Port w/ 90mm Combustion Chambers
MAZ PPS2 Stage 2 Port and Polish
Gasket Match, Bowl Work, Blend and Polish
MAZ SRVG R/R Valve Guides
MAZ SRHSH SR 1/2" Stud Machining,
MAZ SRVJDET Competition Valve Job
MAZ SRRG Grind Rockers for Dual Guide Conversion


[IMG][/IMG]