TX Pretty rad GM LS cooling setup for s chassis - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

silhou · 05-27-2014, 06:09 PM

Took notes from stews build and pretty much replicated it. Made all the tanks in house.
Asking 1500

Hot lapped with this setup and it never got above 180 degrees

Setup includes everything you need
Afco radiator
Volvo s60r efan and shroud 3600 cfm
-20an inlets and outlets from cbm
-20 rad hoses
Alper motorsports -4an steam ports plumbed into each corner of cylinder heads with a cross over up front
Slp 160 For standard thermo housing
160 ls2 thermo for -20an housing
Silhouette garage surge tank with moroso cap and all -4an and stainless plumbing going to heads and top of rad
Stainless water feed line plumbed into water pump (comes with water pump) other heater port blocked off
Silhouette garage overflow with all plumbing
Mount for s13 if you want it to lean it forward to clear

05-27-2014, 06:09 PM	#1
silhou Leaky Injector Join Date: Mar 2010 Location: houston Age: 37 Posts: 62 Trader Rating: (1) Feedback Score: 1 reviews	Pretty rad GM LS cooling setup for s chassis Took notes from stews build and pretty much replicated it. Made all the tanks in house. Asking 1500 Hot lapped with this setup and it never got above 180 degrees Setup includes everything you need Afco radiator Volvo s60r efan and shroud 3600 cfm -20an inlets and outlets from cbm -20 rad hoses Alper motorsports -4an steam ports plumbed into each corner of cylinder heads with a cross over up front Slp 160 For standard thermo housing 160 ls2 thermo for -20an housing Silhouette garage surge tank with moroso cap and all -4an and stainless plumbing going to heads and top of rad Stainless water feed line plumbed into water pump (comes with water pump) other heater port blocked off Silhouette garage overflow with all plumbing Mount for s13 if you want it to lean it forward to clear