it just wont start - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

88b20crx · 10-06-2004, 04:39 PM

ok, heres the low down. just installed a new KA into my homies car and it wont start.
we have spark because we pulled the plug out with the wire and grounded it and they all sparked.
We have fuel because not only can we smell it but i tested the resistance of each injector and all injectors clicked when you turn the distributor when its out of the car and ignition is on.
We have compression because we stuffed rags in the spark plug holes in the valve cover and they all shot out.
we have timing as far as i know, because we put the piston at TDC on itscompression stroke, and we slid the distributo in so after it turns it lines up with the # One tower on the cap.

we baught the new engine from a place called atarco and it looks like the timing chain is on there propper. so what the HELL?

10-06-2004, 04:39 PM	#1
88b20crx Join Date: Jul 2004 Location: manteca Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	it just wont start ok, heres the low down. just installed a new KA into my homies car and it wont start. we have spark because we pulled the plug out with the wire and grounded it and they all sparked. We have fuel because not only can we smell it but i tested the resistance of each injector and all injectors clicked when you turn the distributor when its out of the car and ignition is on. We have compression because we stuffed rags in the spark plug holes in the valve cover and they all shot out. we have timing as far as i know, because we put the piston at TDC on itscompression stroke, and we slid the distributo in so after it turns it lines up with the # One tower on the cap. we baught the new engine from a place called atarco and it looks like the timing chain is on there propper. so what the HELL?