Oil Catch System interest - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

driftstyre · 10-08-2004, 05:37 PM

Just guaging interest for our SR comp. catch tank/system. Included would be the 6061 T6 tank, welded on AN-8 on each side, -8 to barb then heat shielded clear/braided plastic lines running to center vent, then down to crankcase. On the intake side, an NPT to barb replaces the PCV valve. It is designed for motorsport use and would be for "off road use only" ahem. It also is designed to fit with electric fans w/ out a shroud.

10-08-2004, 05:37 PM	#1
driftstyre Zilvia.net Advertiser Join Date: Jul 2003 Location: Boston Age: 46 Posts: 748 Trader Rating: (4) Feedback Score: 4 reviews	Oil Catch System interest Just guaging interest for our SR comp. catch tank/system. Included would be the 6061 T6 tank, welded on AN-8 on each side, -8 to barb then heat shielded clear/braided plastic lines running to center vent, then down to crankcase. On the intake side, an NPT to barb replaces the PCV valve. It is designed for motorsport use and would be for "off road use only" ahem. It also is designed to fit with electric fans w/ out a shroud.