MI FS: Misc. S13 and SR20DET parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rLAspecS14 · 10-17-2014, 07:16 AM

Located near Ann Arbor, MI. PM is the best way to reach me. Prefer local pick ups, but can ship most parts at additional cost. I will keep updating this as I add and sell parts.

Manifold - Sold
Engine Mounts - Sold
Gauge cluster - Sold

OEM RPS13 hood in good condition, no noticeable dents or creases. Originally red, painted with rattle can. $75
OEM Pignose bumper cover in decent condition, some scrapes on the bottom. Has some Asian lettering painted under the passenger head light. Could be sanded out. $150

Hatch rear center garnish. Small dent that can be seen in the picture. OEM red. $50

Lifters - $10 each or $70 for all 8

OEM SR downpipe - $25, generic 3" exhaust - $50

S13 Red Top Long Block. The main bearing spun so the crank was ground down. Has new +.25 main and rod bearings, new thrust bearings, new piston rings, new ARP rod bolts. New water pump is also included. It is about 95% complete, it is probably missing a few fasteners. $1000

Will part out. Short block $650, head $350. If you are seriously interested, I will lay out all the parts off the motor to document what exactly is coming with the block/head. Willing to trade for suspension arms, 5 lug swap, Z32 or Brembo brakes.

10-17-2014, 07:16 AM	#1
rLAspecS14 Leaky Injector Join Date: Aug 2004 Location: Ann Arbor Age: 40 Posts: 62 Trader Rating: (0) Feedback Score: 0 reviews	FS: Misc. S13 and SR20DET parts Located near Ann Arbor, MI. PM is the best way to reach me. Prefer local pick ups, but can ship most parts at additional cost. I will keep updating this as I add and sell parts. Manifold - Sold Engine Mounts - Sold Gauge cluster - Sold OEM RPS13 hood in good condition, no noticeable dents or creases. Originally red, painted with rattle can. $75 OEM Pignose bumper cover in decent condition, some scrapes on the bottom. Has some Asian lettering painted under the passenger head light. Could be sanded out. $150 Hatch rear center garnish. Small dent that can be seen in the picture. OEM red. $50 Lifters - $10 each or $70 for all 8 OEM SR downpipe - $25, generic 3" exhaust - $50 S13 Red Top Long Block. The main bearing spun so the crank was ground down. Has new +.25 main and rod bearings, new thrust bearings, new piston rings, new ARP rod bolts. New water pump is also included. It is about 95% complete, it is probably missing a few fasteners. $1000 Will part out. Short block $650, head $350. If you are seriously interested, I will lay out all the parts off the motor to document what exactly is coming with the block/head. Willing to trade for suspension arms, 5 lug swap, Z32 or Brembo brakes. Last edited by rLAspecS14; 11-15-2014 at 09:39 AM..