Maximum TIRE(Rubber) fitment thread - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

***dorkidori_s13*** · 07-16-2015, 04:54 PM

So ive picked up a set of Super Advan Generation 2s that are 17x8.5 +30 and 17x9.5 +38.

question 1: ive never run wider wheels with higher offsets (without running 25mm spacers). im thinking the rears will clear the coils, but the fronts im pretty sure are going to wind up rubbing the springs. anyone have experience with these sizes/offsets? im currently running Fortune Auto V4 coils that have the eccentric adapters on the top holes of the brackets.

question 2: im not going for the hella flush look, but if i do add spacers, i would like to push the wheels out just a bit so they sit flush with the fenders (not super low). im thinking 15mm bolt on spacers, i want to keep a good amount of tire on these with minimum stretch. any input on good tire sizes to run. i was planning on 225/40R17 upfront and 245/40/R17 out back. my rear fenders are rolled and not pulled. front fenders are untouched.

please no flaming, im new to the proper fitting tire world and i need to get the tires ordered next week as the wheels are showing late next week i believe. any positive input would be appreciated

07-16-2015, 04:54 PM	#11
*dorkidori_s13* ITS LISA'S FAULT!!! Join Date: Jun 2003 Location: Las Vegas Age: 43 Posts: 7,496 Trader Rating: (41) Feedback Score: 41 reviews	So ive picked up a set of Super Advan Generation 2s that are 17x8.5 +30 and 17x9.5 +38. question 1: ive never run wider wheels with higher offsets (without running 25mm spacers). im thinking the rears will clear the coils, but the fronts im pretty sure are going to wind up rubbing the springs. anyone have experience with these sizes/offsets? im currently running Fortune Auto V4 coils that have the eccentric adapters on the top holes of the brackets. question 2: im not going for the hella flush look, but if i do add spacers, i would like to push the wheels out just a bit so they sit flush with the fenders (not super low). im thinking 15mm bolt on spacers, i want to keep a good amount of tire on these with minimum stretch. any input on good tire sizes to run. i was planning on 225/40R17 upfront and 245/40/R17 out back. my rear fenders are rolled and not pulled. front fenders are untouched. please no flaming, im new to the proper fitting tire world and i need to get the tires ordered next week as the wheels are showing late next week i believe. any positive input would be appreciated __________________ Check out my IG for what I'm up to! DORKIDORI INSTAGRAM!!!