NJ Sr20det CP Pistons w/Eagle Rods...Sr20det ARP Head Bolts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BrokenWhite240 · 07-20-2015, 09:35 AM

Purchased these when I was going to build up my SR a few years ago off of this site. But I decided to build up a Rb25 instead of another Sr. So I no longer need this stuff so selling them dirt cheap to buy some fuel injectors.

Piston w/Rods- $310 shipped (Think of it as getting Eagle rods for cheaper and getting pistons for free)--Sold
ARP Headstuds- $85 shipped --Sold

Or willing to work out a great deal if you want both.

Pistons: Used CP .020 over bore (86.5) 9:1 comp ratio Sr20det pistons. Previous owner said they were only dyno tuned on a couple of times I believe.
They do have some regular wear on the skirts. Also one a slight nick on the very bottom of the skirt. They also do have some pitting on the sides and some tiny nicks on the tops on some of them. The ring lands are clean and no piston rings are included.

Rods: Sr20det Eagle H-beam Rods are included with the pistons. The rods are in great condition, no spun bearings. The Arp rod bolts also look fine on the as well.

ARP Headstuds: They are in great condition come with the Arp grease. But they are missing 1 (one) washer for the nuts. I have 10 (ten) bolts and nuts but only 9 (nine) washers. I'm sure you could buy a single one from Arp cheap or find a suitable washer for cheap.

More pics to come...

Arp Head Bolts:

07-20-2015, 09:35 AM	#1
BrokenWhite240 Zilvia Addict Join Date: Nov 2007 Location: Cherry Hill, NJ Age: 39 Posts: 618 Trader Rating: (19) Feedback Score: 19 reviews	Sold-Sr20det CP Pistons w/Eagle Rods...Sr20det ARP Head Bolts Purchased these when I was going to build up my SR a few years ago off of this site. But I decided to build up a Rb25 instead of another Sr. So I no longer need this stuff so selling them dirt cheap to buy some fuel injectors. Piston w/Rods- $310 shipped (Think of it as getting Eagle rods for cheaper and getting pistons for free)--Sold ARP Headstuds- $85 shipped --Sold Or willing to work out a great deal if you want both. Pistons: Used CP .020 over bore (86.5) 9:1 comp ratio Sr20det pistons. Previous owner said they were only dyno tuned on a couple of times I believe. They do have some regular wear on the skirts. Also one a slight nick on the very bottom of the skirt. They also do have some pitting on the sides and some tiny nicks on the tops on some of them. The ring lands are clean and no piston rings are included. Rods: Sr20det Eagle H-beam Rods are included with the pistons. The rods are in great condition, no spun bearings. The Arp rod bolts also look fine on the as well. ARP Headstuds: They are in great condition come with the Arp grease. But they are missing 1 (one) washer for the nuts. I have 10 (ten) bolts and nuts but only 9 (nine) washers. I'm sure you could buy a single one from Arp cheap or find a suitable washer for cheap. More pics to come... Arp Head Bolts: __________________ Team Prettyboys Last edited by BrokenWhite240; 07-23-2015 at 02:49 PM..