Adjusting front camber - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Cesar14 · 05-03-2016, 01:46 PM

What up guys so recently i messed around with the front camber plates because they were not at the same spec, i dialed them to be the same but when i lowered the car back on its wheels one wheel still had more camber than the other. i lifted it back up rechecked everything made sure there was no damage to the coilover (k-Sport) and made sure camber plates were the same. I set the plates to be as far negative as they would go just to compare, brought the car back down and the driver side wheel had the amount of camber i had set it to but the driver side wheel barely had any if any negative camber. Any idea on what may be the issue? also made sure no arms were damaged and everything looks fine

05-03-2016, 01:46 PM	#1
Cesar14 Join Date: Nov 2015 Location: Salem OR Age: 31 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Adjusting front camber What up guys so recently i messed around with the front camber plates because they were not at the same spec, i dialed them to be the same but when i lowered the car back on its wheels one wheel still had more camber than the other. i lifted it back up rechecked everything made sure there was no damage to the coilover (k-Sport) and made sure camber plates were the same. I set the plates to be as far negative as they would go just to compare, brought the car back down and the driver side wheel had the amount of camber i had set it to but the driver side wheel barely had any if any negative camber. Any idea on what may be the issue? also made sure no arms were damaged and everything looks fine