Shafts Don't Fit Into Pumpkin - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Maeda · 12-03-2004, 01:11 PM

Ok so i'm swapping pumpkins to finish my nismo lsd install and....

The half shafts don't fit as the directions say. This is for the open diff model.

Viewed from the top, drive-shaft holes infront, it says the shorter one goes on the left and longer one goes on the right if the hypoid gear ratio is less than 4.000, and the opposite if it is greater than or equal to 4.000.

The shafts fit if I assume I have a greater than 4.000 hypoid gear.

The funny thing is I swore stock was 3.9 and I know I havn't changed it...

12-03-2004, 01:11 PM	#1
Maeda Nissanaholic! Join Date: Dec 2002 Location: Camp Snake Bite, CA RIP Posts: 2,356 Trader Rating: (0) Rides Gallery: Maeda Feedback Score: 0 reviews	Shafts Don't Fit Into Pumpkin Ok so i'm swapping pumpkins to finish my nismo lsd install and.... The half shafts don't fit as the directions say. This is for the open diff model. Viewed from the top, drive-shaft holes infront, it says the shorter one goes on the left and longer one goes on the right if the hypoid gear ratio is less than 4.000, and the opposite if it is greater than or equal to 4.000. The shafts fit if I assume I have a greater than 4.000 hypoid gear. The funny thing is I swore stock was 3.9 and I know I havn't changed it... __________________