NC ITBs for VH45de

[OpenThrottle]

Name: AJ
Item(s): ITBs for vh45
Price: $500 + shipping
Location: Chapel Hill, NC
Contact info: post in thread or PM me


For sale is an ITB setup for a vh45de engine. Following will be included:

-12 individual throttle bodies (you will have 4 extras)
-6 custom billet flanges to mate the ITBs to the vh45 heads
-8 Air Horns
-8 Mesh covers for horns
-8 Injectors
-4 feet of Fuel Rail Stock so you can make a custom fuel rail
-2 TPS sensors
-and anything else that you see in the pictures or that I have for this ITB setup

The ITBs with horns sit up about 2-4 inches shorter than the stock intake manifold. You can remove the horns and the ITB is maybe an inch taller
than the top edge of the valve covers.

There is still a little bit of work that needs to be done for this to be complete:
1) Get a standalone ECU. MS3 or EMU Black ECU would be good options.
2) Make a linkage kit or just order a Jenvey V-Engine Linkage kit.
3) Shorten the ITB Linkage Rod and drill new holes
4) Fuel rail

I am kind of firm on the price but shoot me an offer and maybe we can work something out.