Quote:
Originally Posted by gt3071r240
ok so considering changing turbo for the build...I currently have a Gt35r .82 AR, and considering going to a GTX3071r gen 2 in a .63 or .82 AR
Motor specs currently are:
CP 9:1 DET 87mm piston on stock sleeves
calculated compression is 9.285:1 with decking
1.8mm apexi headgasket
Eagle Rods
Mazworx head studs
P11 VVL head with Supertech 93lbs springs
P11 Cams
Mazworx Intake/Kit
ID1300 ATL FC with Bosch 088
all other supporting mods are there...
Not really looking to make more than 550Whp as it think the bottom end will become an issue.
Thoughts..
|
Just go with a smaller turbine housing on the GT35, going to a GT30 would be quite the downgrade and it's not the best sized turbo for 500HP+.
Also be sure to measure your piston to valve clearance during assembly since you're running the DET pistons, don't ever just trust someone else's "it works"
02-10-2018, 02:03 PM
Threaded Mode