![]() |
|
Builds (and builds only) Got a build thread? It goes here, build threads anywhere else on the forum will be locked and never moved. |
|
Thread Tools | Display Modes |
![]() |
#11 |
Zilvia Junkie
![]() Join Date: Feb 2008
Location: Carry Water, Chop Wood
Age: 36
Posts: 507
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
So, i was driving my car, and knew there's really no more events that i was looking forward to the rest of the year. So i decided to park the car and start the last tear down.
Got out the Super UP! and some rollers. ![]() ![]() decided to swing the car around. ![]() ![]() ![]() put on jack stands and started by taking wheels off... ![]() ![]() After cars and coffee i was was fixing my moms car and had to go get some parts, going through a small town and i ended up banging my oil pan and subframe/swaybar on a GINORMOUS pot hole. (wasnt paying attention) when i got home i noticed the headlight was kinda droopy. Turns out, the weld broke on the fender where the headlight bolts to it and i decided to zip tie it so i could still use the car a couple more times and run the gas down. Oil pan/cross member. ![]() ![]() ![]() Close up. This was the deciding factor that i wanted to just take the car apart for the last time and fix stuff that bothered me to show it off. ![]() like the seam sealer ![]() and the brake booster/master leaking. ![]() going to be hard to scrape this one off, but i will when i re-spray the engine bay. ![]() Going to scrape the IG handle off. as times change so do I. ![]() Started disassembly of the front end/engine bay. ![]() ![]() ![]() ![]() ![]() ![]() MEH, point of no return? ![]() ![]() going to re-wire a thermostatic fan controller on so *snip* and rad/fans off. ![]() ![]() Off with the fenders, but first the side-skirts must go. ![]() on the floor organized. ![]() time for the suspension to dissappear. ![]() Almost!! ![]() OFF. ![]() Next was some of the wiring, chassis peeled back ![]() Brake and clutch master/lines ![]() Heater hoses. ![]() finished stripping the engine of wires. hooking up the engine hoist. ![]() Friend Logan, (the one who took the pictures at the dogwood tree and in front of the yellow flowers) came by to help pull the engine/trans. ![]() Annnndd it's out!! ![]() NOW WHAT!? ¯\_(ツ)_/¯ ![]() Interior is next..... ![]() ![]() ![]() ![]() Dash out, next is dash bar and more wiring. ![]() Rats nest. ![]() its all on the floor to be un-tangled. ![]() everything is clear. ![]() That is the (full) chassis and engine harness all in one pile. ![]() Ended up selling these for cheap ![]() Hung up the areo/fenders to clear the floor a bit. ![]() |
![]() |
![]() |
Bookmarks |
|
|