z32 caliper bracket - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BrazyMstrP · 03-07-2005, 01:28 AM

hey all,

I was wondering if someone had extra z32 calipers laying around, if they could measure the distance from the mounting holes from center to center. I have a subaru and was told that the z32s were the same as the old skool sti (non usdm) calipers. I know for sure the pads and hardware are the same, but I'm not too sure about the actual castings.

If in fact they are the same, that means that the subaru brakes can be made to fit the nissans as well. So technically the stock wrx brakes would be pretty equivalent to the q45 2 piston swap. and then if that's the case you could use the newer sti brembos.

So if someone can feed me this info that would be dope. Thanks

-Jack

03-07-2005, 01:28 AM	#1
BrazyMstrP Join Date: Sep 2003 Location: Los Angeles Age: 40 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	z32 caliper bracket hey all, I was wondering if someone had extra z32 calipers laying around, if they could measure the distance from the mounting holes from center to center. I have a subaru and was told that the z32s were the same as the old skool sti (non usdm) calipers. I know for sure the pads and hardware are the same, but I'm not too sure about the actual castings. If in fact they are the same, that means that the subaru brakes can be made to fit the nissans as well. So technically the stock wrx brakes would be pretty equivalent to the q45 2 piston swap. and then if that's the case you could use the newer sti brembos. So if someone can feed me this info that would be dope. Thanks -Jack