no clutch pedal pressure(AT-MT swap) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*NemeGuero* · 03-24-2005, 05:27 PM

so, I'm 95% finished with the manual tranny swap and I filled up the MC with brake fluid. check. double checked the hardline. check. called my buddy over to help me bleed the pedal. he pushes it in and it just hits the floor and stays.. ('cuz of the spring on the pedal). so I ask him to pump it by hand and pull it back up. still nothing, the fluid level doesn't drop. so I checked the pin on the pushrod for the MC and it's fine. opened up the bleeder on the slave and a little air pushes out but no fluid and no fluid level change either.

could my hardline be clogged?

thanks
Evan

03-24-2005, 05:27 PM	#1
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 40 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	no clutch pedal pressure(AT-MT swap) so, I'm 95% finished with the manual tranny swap and I filled up the MC with brake fluid. check. double checked the hardline. check. called my buddy over to help me bleed the pedal. he pushes it in and it just hits the floor and stays.. ('cuz of the spring on the pedal). so I ask him to pump it by hand and pull it back up. still nothing, the fluid level doesn't drop. so I checked the pin on the pushrod for the MC and it's fine. opened up the bleeder on the slave and a little air pushes out but no fluid and no fluid level change either. could my hardline be clogged? thanks Evan