things to do after coilover install. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

raen419 · 06-06-2005, 09:23 AM

no, you don't need a spring compressor.
you need spanner wrenches and your own 2 hands.
and you installed 2 front pairs of MR's? wtf? two fronts wouldn't bolt up to the rear uprights.

to adjust ride height, loosen the lower locking perch at the shock bracket, then twist the shock body (spring and all) to lower/raise the ride height.

"mature the coilover spring install"
huh?
you need to reword your post or something.

search man, search!

06-06-2005, 09:23 AM	#2
raen419 Zilvia Member Join Date: Jul 2003 Location: Jasper, AL Age: 42 Posts: 253 Trader Rating: (0) Feedback Score: 0 reviews	no, you don't need a spring compressor. you need spanner wrenches and your own 2 hands. and you installed 2 front pairs of MR's? wtf? two fronts wouldn't bolt up to the rear uprights. to adjust ride height, loosen the lower locking perch at the shock bracket, then twist the shock body (spring and all) to lower/raise the ride height. "mature the coilover spring install" huh? you need to reword your post or something. search man, search!