Serious problems while installing J30 LSD. NEED HELP AND ADVICE

[exitspeed]

Well I bought a pre 95 J30 LSD with halfshafts from a memer on here and finally got around to installing it last night. Before I installed it I wanted to make sure I had all bases covered and I asked alotta questions on here and I even posted pics of it here to make sure it was the right LSD. Well here's what I ran into last night installing it. I do have the halfshafs BTW.

1. The LSD itself is ATLEAST 1.5" to long. Meaning the driveshaft would have to be shortened.

2. The rear mounting points are completly different. The stock open diff has for this LSD has 2 that are HUGE. The size of them is not the problem(I could drill it out) but the spacing between them is also off.

3. The front 2 mounting points are ALSO spaced too far apart to work(a good half inch)

4. There is a tube at the top of the LSD that I assumed my open diff would have but doesn't and there is also some sort of sensor wire thing coming off of the front behind the front mounting points.

Here is the link of my previous post with pics that I took of the LSD. I really need some help here I don't wanna totolly loose my ass on this. And I really need LSD. Any advice guys would help.
http://www.zilvia.net/f/showthread.p...ht=confirm+lsd

Thanx
Mel