exhaust cam intake side! car wont start! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240silvia · 10-16-2005, 05:13 PM

ok well i made sure that the motor was at TDC, cams and gears were lined up correctly. well i did some research and read that u need to move the teeth (or gear) 4 teeth clockwise from initail mark, so i did that and everything is snug and good. i put everything back together and tried to start it and nuthin just spins. soooo anyone have anyidea what could be wrong? thanx

10-16-2005, 05:13 PM	#1
240silvia Nissanaholic! Join Date: Jul 2002 Location: Wilmington NC Age: 40 Posts: 2,060 Trader Rating: (3) Feedback Score: 3 reviews	exhaust cam intake side! car wont start! ok well i made sure that the motor was at TDC, cams and gears were lined up correctly. well i did some research and read that u need to move the teeth (or gear) 4 teeth clockwise from initail mark, so i did that and everything is snug and good. i put everything back together and tried to start it and nuthin just spins. soooo anyone have anyidea what could be wrong? thanx