![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Addict
![]() Join Date: May 2003
Location: Northern California
Age: 42
Posts: 850
Trader Rating: (0)
![]() ![]() ![]() Feedback Score: 0 reviews
|
Wiring help please!
I have an '89 Nissan 240SX w/ 1996 Blacktop RPS13 swap and a S13 Silvia Tri-Projector front end
The wiring was professionally done by Danny Young here in California and he left all my stock plugs (ka24d) on the car incase I planned on swapping back. The SR20DET is back in with a new Intake Manifold/turbo/fuel system and I'm having trouble getting it to turn on. The car won't even flash the hazards, the battery is fully charged and relocated to the trunk, but the car isn't getting any kind of power. So I believe it has to do with some plugs in the engine that aren't connected right now. There are three sets that I'm confused about... 1st Set: This is what the plugs look like and I think they go to the transmission, not sure though. ![]() This is where they are located on the main engine harness. They go into this area of wiring and they are pretty long which leads me to believe they go underneath to the tranny but I could be mistakened. ![]() 2nd Set: These branch off the fuse box, I have a S13 Tri-Projector front end so are these plugs for the pop ups which I don't have anymore? I don't remember these going to anywhere, here's the picture. ![]() 3rd Set: These two plugs (ones black and ones grey in the picture) come off the main harness before the ignitor. Where do these go? ![]() Thanks for all the help, I'm a bit stumped is all....
__________________
- Jay ![]() WTB: Nothing at the moment. LEWL WTS: Everything sold, thanks folks! |
![]() |
![]() |
Sponsored Links |
Bookmarks |
|
|