350z brembo -> s14 brake lines - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

FinalDrive · 07-11-2006, 04:32 PM

What brake lines can I use to put 350z track brembos on my s14? Stock lines use a banjo fitting while the brembos use a regular fitting. Will z32 conversion lines work?

nlzmo400r · 07-11-2006, 07:36 PM

yes, they'll work. What do you plan on making the brackets out of?

projectRDM · 07-11-2006, 08:30 PM

Quote:

Originally Posted by nlzmo400r

yes, they'll work. What do you plan on making the brackets out of?

What brackets? They bolt right on after drilling the spindle.

FinalDrive · 07-11-2006, 08:51 PM

yup, they bolt on if you enlarge the holes on the spindle

thanks for the info on the lines

nlzmo400r · 07-11-2006, 09:07 PM

i thought the offset on the caliper was way off? I ended up choosing the STi calipers because they were a bit larger and because I thought I would have to make a double plane bracket for the z33 calipers.

projectRDM · 07-12-2006, 04:32 AM

Welcome to Earth. Z33 caliper fitment was verified about three years ago, right after the car was introduced.

07-11-2006, 04:32 PM	#1
FinalDrive Zilvia Junkie Join Date: Jun 2003 Location: GA Posts: 494 Trader Rating: (2) Feedback Score: 2 reviews	350z brembo -> s14 brake lines What brake lines can I use to put 350z track brembos on my s14? Stock lines use a banjo fitting while the brembos use a regular fitting. Will z32 conversion lines work?

07-11-2006, 07:36 PM	#2
nlzmo400r Zilvia FREAK! Join Date: Oct 2003 Location: louisiana Posts: 1,248 Trader Rating: (0) Feedback Score: 0 reviews	yes, they'll work. What do you plan on making the brackets out of? __________________ 'my drinking team has a racing problem' [email protected] - gt32 .6bar

07-11-2006, 09:07 PM	#5
nlzmo400r Zilvia FREAK! Join Date: Oct 2003 Location: louisiana Posts: 1,248 Trader Rating: (0) Feedback Score: 0 reviews	i thought the offset on the caliper was way off? I ended up choosing the STi calipers because they were a bit larger and because I thought I would have to make a double plane bracket for the z33 calipers. __________________ 'my drinking team has a racing problem' [email protected] - gt32 .6bar

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-11-2006, 08:51 PM	#4
FinalDrive Zilvia Junkie Join Date: Jun 2003 Location: GA Posts: 494 Trader Rating: (2) Feedback Score: 2 reviews	yup, they bolt on if you enlarge the holes on the spindle thanks for the info on the lines

07-12-2006, 04:32 AM	#6
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Welcome to Earth. Z33 caliper fitment was verified about three years ago, right after the car was introduced.