Transmission - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

student · 06-15-2002, 02:46 PM

I took off my trans Friday to put in my new SPEC clutch. Today we tried putting the transmission back and it would not go. The teeth on my clutch and the cover is scratched but I dont think it matters. So we started hammering the underbody to get more space and still it would not go. So now i am going to do more hammering so I can get this damn thing back on. Did any of you guys have problems like this. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

pornallstar · 06-15-2002, 02:53 PM

What exactly is in the way?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>  The tranny should go right in with out that much force.

Natty · 06-15-2002, 08:25 PM

Sort of off topic, but how heavy is the transmission? Do you just need to jack up the front to remove it?
I need to replace mine and I want to save the labor  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cool.gif" border="0" valign="absmiddle" alt='

'>
Jeff

adey · 06-15-2002, 08:38 PM

Although I've never taken a transmission out nor put a transmission back into a car, I think it can safely be said that hammering away at the underbody (floor pan) Is NOT a good idea at all. I imagine that under _no_ circumstances is it really "okay" to hammer out your underbody.

Hammering the firewall to fit an RB25DET in there, sure, but the floor pan?? ......

wherezmytofu · 06-16-2002, 12:38 AM

pm oni...he just removed and oput his back like last month  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cool.gif" border="0" valign="absmiddle" alt='

'>

camppain · 06-16-2002, 12:51 AM

you damaged your splines? is that what your referring to? ive replaced my clutch and it is hard if you have no one helping you on the garage floor like i did. but i still got it in with no hammer. that just sounds like some half ass job that your doing. have you ever done any type of tune ups on a car to be taking a trans off and putting it back on?

from what youve said what your doing sounds very scary. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'>

ridebmx · 06-16-2002, 02:02 AM

i took my tranny out last month and put it back in in about hour and half to two hours, there is no way you should have to hammer at the underbody...either your not lining it up right, or you fucked something up, most likely the spline on your tranny like someone else stated, that or you didnt have the clutch disk lined up right...and the last and only thing i would think it would be is you got the wrong clutch disk...did you check to see if it slid on your spline before you bolted the pressure plate to the flywheel...i dont know of anything else that would cause it to not go back in, mine went right in place....

MyFirst240SX · 06-16-2002, 07:13 AM

my tranny when i had to replace my clucth would not go up straight at all.  But we took the method of turningthe tranyuntill it did fit up there then strangting  it out.its just a bitch to line up and its take some pactiance.  if i could spell it i would be a bad man
sean

HippoSleek · 06-16-2002, 08:00 AM

Stupid question, but you DID use a clutch alignment tool, right?

06-15-2002, 02:46 PM	#1
student Leaky Injector Join Date: Dec 2001 Posts: 78 Trader Rating: (0) Feedback Score: 0 reviews	I took off my trans Friday to put in my new SPEC clutch. Today we tried putting the transmission back and it would not go. The teeth on my clutch and the cover is scratched but I dont think it matters. So we started hammering the underbody to get more space and still it would not go. So now i am going to do more hammering so I can get this damn thing back on. Did any of you guys have problems like this. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> __________________ student

06-15-2002, 02:53 PM	#2
pornallstar Leaky Injector Join Date: Mar 2002 Posts: 140 Trader Rating: (0) Feedback Score: 0 reviews	What exactly is in the way?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>  The tranny should go right in with out that much force. __________________ <img src=http://www.geocities.com/marks300zxtt/pornallstarsig.txt> Light travels faster than sound. This is why some people appear bright until you hear them speak.

06-15-2002, 08:25 PM	#3
Natty Zilvia Addict Join Date: Dec 2001 Location: Nashville, TN Posts: 944 Trader Rating: (0) Feedback Score: 0 reviews	Sort of off topic, but how heavy is the transmission? Do you just need to jack up the front to remove it? I need to replace mine and I want to save the labor  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cool.gif" border="0" valign="absmiddle" alt=''> Jeff __________________ 1991 White 240sx Fastback LE, rusty spoiler, weak driveshaft, exhaust rattle.... Rattles are just your cars way of saying 'I love you.'

06-15-2002, 08:38 PM	#4
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,072 Trader Rating: (0) Feedback Score: 0 reviews	Although I've never taken a transmission out nor put a transmission back into a car, I think it can safely be said that hammering away at the underbody (floor pan) Is NOT a good idea at all. I imagine that under _no_ circumstances is it really "okay" to hammer out your underbody. Hammering the firewall to fit an RB25DET in there, sure, but the floor pan?? ...... __________________ Instagram: @SX180HKG

06-16-2002, 12:38 AM	#5
wherezmytofu BANNED Join Date: Nov 2001 Posts: 1,873 Trader Rating: (0) Feedback Score: 0 reviews	pm oni...he just removed and oput his back like last month  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cool.gif" border="0" valign="absmiddle" alt=''>

06-16-2002, 12:51 AM	#6
camppain Will never get banned... Join Date: Sep 2001 Location: San Diego CA Age: 45 Posts: 1,510 Trader Rating: (0) Feedback Score: 0 reviews	you damaged your splines? is that what your referring to? ive replaced my clutch and it is hard if you have no one helping you on the garage floor like i did. but i still got it in with no hammer. that just sounds like some half ass job that your doing. have you ever done any type of tune ups on a car to be taking a trans off and putting it back on? from what youve said what your doing sounds very scary. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'> __________________ -=-99 Sentra SE 5 speed-=- -=-95 240 SE 5 speed-=-

06-16-2002, 02:02 AM	#7
ridebmx Zilvia Junkie Join Date: Mar 2002 Location: Michigan Age: 41 Posts: 379 Trader Rating: (0) Feedback Score: 0 reviews	i took my tranny out last month and put it back in in about hour and half to two hours, there is no way you should have to hammer at the underbody...either your not lining it up right, or you fucked something up, most likely the spline on your tranny like someone else stated, that or you didnt have the clutch disk lined up right...and the last and only thing i would think it would be is you got the wrong clutch disk...did you check to see if it slid on your spline before you bolted the pressure plate to the flywheel...i dont know of anything else that would cause it to not go back in, mine went right in place.... __________________ I like my car, you may not...You like your car, I may not...To each there own, right? waiting for the sunken look to be cool..lol

06-16-2002, 07:13 AM	#8
MyFirst240SX Zilvia Junkie Join Date: Dec 2001 Posts: 599 Trader Rating: (0) Feedback Score: 0 reviews	my tranny when i had to replace my clucth would not go up straight at all.  But we took the method of turningthe tranyuntill it did fit up there then strangting  it out.its just a bitch to line up and its take some pactiance.  if i could spell it i would be a bad man sean __________________ It is better to drive a Slow car fast than to drive a fast Car slow! '89 FastBack 5spd: Intake/Exhaust,Strut Bars and JL15. '90 Parts car/Some day drag car.

06-16-2002, 08:00 AM	#9
HippoSleek Nissanaholic! Join Date: Aug 2001 Location: elsewhere Posts: 2,081 Trader Rating: (0) Feedback Score: 0 reviews	Stupid question, but you DID use a clutch alignment tool, right?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode