Any CNC machinists in here? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

blaze1 · 08-10-2006, 02:52 PM

I'm 17 and been looking into being a CNC machinist for a while now, I'm planning on going to a JC and getting my associates in manufacturing. But I have been reading on monster and a lot of other employment websites and papers and they are all saying they want to higher people with experience, at least 5 years.

So my question is how hard is it to get a job in machining even if you have all the right credentials and what not? Doesnt seem like too many companies are hiring new machinists. I'm also interested in diesel automotives, which one is the better career and in higher demand at this point?

pablo180 · 08-10-2006, 03:06 PM

I dont get paid to do CNC work but I was a CNC machinist last year on the CSUN formula team operating a VF-2 mill. I will tell you this though. It is not the most appealing work. Its loud, dirty, and can be dangerous. But if you are ok with that then you can get your experience at a machine shop. If they dont have CNC's then look for one that does. I'm not sure what your location is but if you are in Cali then you can call Haas and take a certification course there.

blaze1 · 08-10-2006, 03:08 PM

Scratch that, but thanks for the insight.

I'm cool with doing dirty and loud work as long as it pays good. I will look for some machine shops that are hiring now.

pablo180 · 08-10-2006, 03:12 PM

Nope. Haas is a CNC manufacturer. Located in Santa Barbara.
www.haascnc.com

hendogg8 · 08-10-2006, 04:10 PM

Blaze1, you're not interested in getting an M.E. degree?

The job market is a lot better for M.E.'s I think and CNC machining is part of the work that can be done. It will offer more variety than just CNC milling.

I'm about to graduate and at my current job, I work with CNC's and other equipment in the machine shop quite often. It's cool to machine out parts, but it's also fun to design them.

TheWolf · 08-12-2006, 05:59 AM

the reason they want experience is that.. with experience comes the knowledge to set up toolpaths correctly the first time and make little jigs for parts with ease. Most newb's can't. Certifications and training are great but sometimes that just doesn't match with real world experience. If they want someone who's got 5 years.. Apply anyway and let them know you can work just as fast as a 5 year guy for less and then go up based on performance.

spdfreek0o · 08-12-2006, 09:00 AM

Quote:

The job market is a lot better for M.E.'s

I'm getting ready to start on a MET(Mech. Engineering Technology) degree, more application than theory. I would think that would be a good place to start.

blaze1 · 08-15-2006, 01:45 PM

Quote:

Originally Posted by hendogg8

Blaze1, you're not interested in getting an M.E. degree?

The job market is a lot better for M.E.'s I think and CNC machining is part of the work that can be done. It will offer more variety than just CNC milling.

I'm about to graduate and at my current job, I work with CNC's and other equipment in the machine shop quite often. It's cool to machine out parts, but it's also fun to design them.

I always considerd getting my M.E. degree, but I just never thought of any jobs I could actually get with it, plus I dont have much money for college

so I honestly dont know if I can get it going to a JC.

*ManoNegra* · 08-15-2006, 02:47 PM

A friend of mine is a machinist and does CNC work. Like mentioned already, good pay only comes with experience. Prepare to pay your does earning next to nothing for a few years. Apply yourself and luckily with recommendations it could take less time to climb up.

08-10-2006, 02:52 PM	#1
blaze1 Zilvia Member Join Date: May 2005 Location: Moreno Valley Posts: 185 Trader Rating: (0) Feedback Score: 0 reviews	Any CNC machinists in here? I'm 17 and been looking into being a CNC machinist for a while now, I'm planning on going to a JC and getting my associates in manufacturing. But I have been reading on monster and a lot of other employment websites and papers and they are all saying they want to higher people with experience, at least 5 years. So my question is how hard is it to get a job in machining even if you have all the right credentials and what not? Doesnt seem like too many companies are hiring new machinists. I'm also interested in diesel automotives, which one is the better career and in higher demand at this point?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-10-2006, 03:06 PM	#2
pablo180 Zilvia Member Join Date: Dec 2004 Location: Oxford, UK Age: 42 Posts: 206 Trader Rating: (0) Feedback Score: 0 reviews	I dont get paid to do CNC work but I was a CNC machinist last year on the CSUN formula team operating a VF-2 mill. I will tell you this though. It is not the most appealing work. Its loud, dirty, and can be dangerous. But if you are ok with that then you can get your experience at a machine shop. If they dont have CNC's then look for one that does. I'm not sure what your location is but if you are in Cali then you can call Haas and take a certification course there.

08-10-2006, 03:08 PM	#3
blaze1 Zilvia Member Join Date: May 2005 Location: Moreno Valley Posts: 185 Trader Rating: (0) Feedback Score: 0 reviews	Scratch that, but thanks for the insight. I'm cool with doing dirty and loud work as long as it pays good. I will look for some machine shops that are hiring now.

08-10-2006, 03:12 PM	#4
pablo180 Zilvia Member Join Date: Dec 2004 Location: Oxford, UK Age: 42 Posts: 206 Trader Rating: (0) Feedback Score: 0 reviews	Nope. Haas is a CNC manufacturer. Located in Santa Barbara. www.haascnc.com

08-10-2006, 04:10 PM	#5
hendogg8 Zilvia Member Join Date: Apr 2003 Location: norcal Posts: 265 Trader Rating: (0) Feedback Score: 0 reviews	Blaze1, you're not interested in getting an M.E. degree? The job market is a lot better for M.E.'s I think and CNC machining is part of the work that can be done. It will offer more variety than just CNC milling. I'm about to graduate and at my current job, I work with CNC's and other equipment in the machine shop quite often. It's cool to machine out parts, but it's also fun to design them.

08-12-2006, 05:59 AM	#6
TheWolf Zilvia FREAK! Join Date: Aug 2005 Location: Orange Park, FL (Jax) Posts: 1,468 Trader Rating: (0) Feedback Score: 0 reviews	the reason they want experience is that.. with experience comes the knowledge to set up toolpaths correctly the first time and make little jigs for parts with ease. Most newb's can't. Certifications and training are great but sometimes that just doesn't match with real world experience. If they want someone who's got 5 years.. Apply anyway and let them know you can work just as fast as a 5 year guy for less and then go up based on performance.

08-15-2006, 02:47 PM	#9
ManoNegra Guild of Skullduggerous Intent Join Date: Jan 2004 Location: Socal Posts: 7,841 Trader Rating: (48) Feedback Score: 48 reviews	A friend of mine is a machinist and does CNC work. Like mentioned already, good pay only comes with experience. Prepare to pay your does earning next to nothing for a few years. Apply yourself and luckily with recommendations it could take less time to climb up.