300zx Tie Rod Inners - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ReLevent1 · 08-28-2006, 12:36 AM

Can someone please tell me what year z32 inner tie rods to get for my s13, because i was searching at my work(napa auto parts) and theres three different kinds. I checked out the 91-94 inners and they were short & the thread pitch on the side that screws into the steering rack was wrong.

so yea it would be a lot of help if someone could tell me, and yes i've been searching but still nothing about what year to use.

*ManoNegra* · 08-28-2006, 10:41 AM

Dunno about Napa but I bought the ones SPL sells along with their outers. Fit like a glove.

Sir · 08-28-2006, 11:28 PM

Quote:

Originally Posted by ManoNegra

Dunno about Napa but I bought the ones SPL sells along with their outers. Fit like a glove.

+1
and the price at local autozone was only few bux less than SPL

Silverbullet · 08-29-2006, 02:35 PM

if you get OEM inner and outter, you can't use them with your stock S13 steering knuckle. The ball joint stud wont fit through. I'd suggest Z32 inner with some type of after market that will match the inner tie rod and fit the S13 steering knuckle.

*ManoNegra* · 08-29-2006, 02:48 PM

Quote:

Originally Posted by Silverbullet

if you get OEM inner and outter, you can't use them with your stock S13 steering knuckle. The ball joint stud wont fit through. I'd suggest Z32 inner with some type of after market that will match the inner tie rod and fit the S13 steering knuckle.

Quote:

Dunno about Napa but I bought the ones SPL sells along with their outers. Fit like a glove.

amafmafjdskfjasd;fkamfmmessahge

ReLevent1 · 08-29-2006, 07:13 PM

well reason for me looking at napa is because i work there and i get everything cost plus tax. so yea uber cheap. Can anyone tell me what year?

ReLevent1 · 08-29-2006, 07:13 PM

Quote:

Originally Posted by Silverbullet

if you get OEM inner and outter, you can't use them with your stock S13 steering knuckle. The ball joint stud wont fit through. I'd suggest Z32 inner with some type of after market that will match the inner tie rod and fit the S13 steering knuckle.

yea i know the outter won't work.

hellion240sx · 08-30-2006, 09:21 AM

talk to kuah at splparts.com, or just get it from him!

08-28-2006, 12:36 AM	#1
ReLevent1 Zilvia Junkie Join Date: Dec 2003 Location: ELk Grove/San Jose Age: 38 Posts: 343 Trader Rating: (1) Feedback Score: 1 reviews	300zx Tie Rod Inners Can someone please tell me what year z32 inner tie rods to get for my s13, because i was searching at my work(napa auto parts) and theres three different kinds. I checked out the 91-94 inners and they were short & the thread pitch on the side that screws into the steering rack was wrong. so yea it would be a lot of help if someone could tell me, and yes i've been searching but still nothing about what year to use. __________________ Don't be such a Mc I BE HERRA JERIFTINZ

08-29-2006, 07:13 PM	#6
ReLevent1 Zilvia Junkie Join Date: Dec 2003 Location: ELk Grove/San Jose Age: 38 Posts: 343 Trader Rating: (1) Feedback Score: 1 reviews	well reason for me looking at napa is because i work there and i get everything cost plus tax. so yea uber cheap. Can anyone tell me what year? __________________ Don't be such a Mc I BE HERRA JERIFTINZ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-28-2006, 10:41 AM	#2
ManoNegra Guild of Skullduggerous Intent Join Date: Jan 2004 Location: Socal Posts: 7,841 Trader Rating: (48) Feedback Score: 48 reviews	Dunno about Napa but I bought the ones SPL sells along with their outers. Fit like a glove.

08-30-2006, 09:21 AM	#8
hellion240sx Zilvia FREAK! Join Date: Nov 2003 Location: NOLA Age: 43 Posts: 1,514 Trader Rating: (0) Feedback Score: 0 reviews	talk to kuah at splparts.com, or just get it from him!