bushings - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jung918 · 09-07-2006, 10:42 PM

It is a pain in the ass. If you plan on doing it yourself, then I would highly suggest a bench vise, torch, and a sawzall. Try to find a shop that has a press. Take off all the parts and have them press out all the bushings. Install the bushings and get an alignment. Might as well take off the subframe and get new bushings for them also.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-07-2006, 10:42 PM	#1
Jung918 Post Whore! Join Date: Oct 2003 Location: CA Posts: 3,203 Trader Rating: (2) Feedback Score: 2 reviews	It is a pain in the ass. If you plan on doing it yourself, then I would highly suggest a bench vise, torch, and a sawzall. Try to find a shop that has a press. Take off all the parts and have them press out all the bushings. Install the bushings and get an alignment. Might as well take off the subframe and get new bushings for them also.