Bad HG/ Warped Head? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Gramentz · 02-07-2007, 07:00 AM

Thanks for the input everyone. I'm going to check the oil first. I put the little hole on the thermostat facing up, but perhaps it shifted while I was bolting the housing on, so I'll double check that. I'll try and re-bleed it again and again too.

For the leakdown test, does it matter if the engine is warm? I have an air compressor with the basic attachments, that should work for shooting air into the cylinders right?

02-07-2007, 07:00 AM	#8
Gramentz Leaky Injector Join Date: May 2006 Location: Florida Posts: 106 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for the input everyone. I'm going to check the oil first. I put the little hole on the thermostat facing up, but perhaps it shifted while I was bolting the housing on, so I'll double check that. I'll try and re-bleed it again and again too. For the leakdown test, does it matter if the engine is warm? I have an air compressor with the basic attachments, that should work for shooting air into the cylinders right? __________________ Fully Built Last edited by Gramentz; 02-07-2007 at 08:54 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode