Need HELP with RESISTOR - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

vbl · 04-25-2007, 08:18 PM

here is the part i bought from this website: http://www.jgstools.com/turbo/ka24et.html

i bought 4 resistors from that website and i try to install into my SR, but i dont know how. On the website said "install each resistor on POSITIVE SIDE". They mean install each resistor on RED wire of each injector on my Red Top SR. I heard same color wire of 4 injectors are ground wire, I'm so confuse now, PLEASE PLEASE Help Me, thanks.

statik · 04-25-2007, 08:21 PM

common wire in the injector harness is 12v, red wire, you can also use a multimeter for things like this...

undesiredshoe · 04-25-2007, 11:00 PM

you have to physically cut the wire and connect the resistors in between the two halves.

Z U L8R · 04-26-2007, 05:59 AM

the 12volts are all red, the grounds at the ecu are all black, the grounds on the injector subharness are not all black. ^ cut the red wire on each injector plug and inbetween soldier your resistor, repeat for all 4 injector plugs. resistors are not like diodes, it doesn't matter if you have the gold or silver stripe facing any certain direction, just soldier that mofo in there AIIIGHT!@!!@ BUKAKE!!! @@

04-25-2007, 08:18 PM	#1
vbl BANNED Join Date: Dec 2005 Location: MN Posts: 104 Trader Rating: (1) Feedback Score: 1 reviews	Need HELP with RESISTOR here is the part i bought from this website: http://www.jgstools.com/turbo/ka24et.html i bought 4 resistors from that website and i try to install into my SR, but i dont know how. On the website said "install each resistor on POSITIVE SIDE". They mean install each resistor on RED wire of each injector on my Red Top SR. I heard same color wire of 4 injectors are ground wire, I'm so confuse now, PLEASE PLEASE Help Me, thanks.

04-25-2007, 08:21 PM	#2
statik Zilvia FREAK! Join Date: Oct 2003 Location: Long Island, NY Age: 40 Posts: 1,358 Trader Rating: (0) Rides Gallery: statik Feedback Score: 0 reviews	common wire in the injector harness is 12v, red wire, you can also use a multimeter for things like this... __________________ 97 240sx esaarr \| Current Status: SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-25-2007, 11:00 PM	#3
undesiredshoe Zilvia Addict Join Date: Sep 2005 Location: Wisco Age: 36 Posts: 787 Trader Rating: (2) Feedback Score: 2 reviews	you have to physically cut the wire and connect the resistors in between the two halves.

04-26-2007, 05:59 AM	#4
Z U L8R Zilvia FREAK! Join Date: Jan 2007 Location: Georgia Age: 43 Posts: 1,194 Trader Rating: (0) Feedback Score: 0 reviews	the 12volts are all red, the grounds at the ecu are all black, the grounds on the injector subharness are not all black. ^ cut the red wire on each injector plug and inbetween soldier your resistor, repeat for all 4 injector plugs. resistors are not like diodes, it doesn't matter if you have the gold or silver stripe facing any certain direction, just soldier that mofo in there AIIIGHT!@!!@ BUKAKE!!! @@