How To Weld An Open Differential - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mlogue84 · 06-23-2007, 10:37 PM

Quote:

Originally Posted by thatdrifterguy

i didnt have to take it all out. just took out the cover then got it welded

You mean you took it somewhere and someone else welded it?

blu808 · 06-23-2007, 10:43 PM

Nice write up. That should hold a mildly powered car. We have welded over 240 diffs from all around the country, and not one of them has broken using our process.

I like how carefull you were with all the parts, and how you cleaned everything correctly.

More faq on welded diffs here.

http://www.sdp-online.com/wlfaq.php

*NemeGuero* · 06-25-2007, 12:47 AM

Quote:

Originally Posted by blu808

Nice write up. That should hold a mildly powered car. We have welded over 240 diffs from all around the country, and not one of them has broken using our process.

I like how carefull you were with all the parts, and how you cleaned everything correctly.

More faq on welded diffs here.

http://www.sdp-online.com/wlfaq.php

lol @ plug

thatdrifterguy · 06-23-2007, 10:49 PM

Quote:

Originally Posted by Mlogue84

You mean you took it somewhere and someone else welded it?

something like that. my welder broke halfway through. k sorry. maybe they did take it apart.

Mlogue84 · 06-23-2007, 10:54 PM

Quote:

Originally Posted by thatdrifterguy

something like that. my welder broke halfway through. k sorry. maybe they did take it apart.

What a pain, I hate starting something and not being able to finish. How is it holding up?

thatdrifterguy · 06-23-2007, 11:14 PM

i'd say its doing real good. i havent checked on it since i got it. ive had mine since feb. and i dont notice anything wrong. it should hold up pretty long as long as you did the welds good. but i think it does some to the trans mounts. you know how the wheels hop on some corners, well, my tranny hops a little sometimes

06-23-2007, 10:43 PM	#2
blu808 Post Whore! Join Date: Dec 2002 Location: Campbell, Ca Age: 42 Posts: 5,010 Trader Rating: (3) Feedback Score: 3 reviews	Nice write up. That should hold a mildly powered car. We have welded over 240 diffs from all around the country, and not one of them has broken using our process. I like how carefull you were with all the parts, and how you cleaned everything correctly. More faq on welded diffs here. http://www.sdp-online.com/wlfaq.php __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-23-2007, 11:14 PM	#6
thatdrifterguy Zilvia Junkie Join Date: Oct 2006 Location: guam/okinawa Posts: 381 Trader Rating: (0) Feedback Score: 0 reviews	i'd say its doing real good. i havent checked on it since i got it. ive had mine since feb. and i dont notice anything wrong. it should hold up pretty long as long as you did the welds good. but i think it does some to the trans mounts. you know how the wheels hop on some corners, well, my tranny hops a little sometimes