need help with my idea - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NorCalEvo · 07-09-2007, 04:42 PM

Hey guys.

Ok so i have my S13 hatch right! I bought it with a twin cam swap already in it. Now here is my stupid/pretty sick idea. I want to twin turbo this motor. It is a regular Ka24de, Anyone know of or can get me together with someone that can fabricate me a manifold for this wicked idea.

Yes i know that the money that i am going to invest in this idea would probably be better off just buying an SR or an RB, but i want to be unique and just see if it can be done.

So any help or referencing information would be greatly appreciated. I figure 10K would cover the cost of parts and labor and stuff so if you think you can help then reply to this thread or PM me. Please Please Please dont hate on me for this one. I am just trying to go out on a limb here and see if it can even be done. I think it would be sick as hell to have something like this work out.

Thanks in advance for any help that you can offer guys.

Peace.

slower than you · 07-09-2007, 04:47 PM

well, according to your sig you already did it deustchey mcdeustcher.

adrians_s13 · 07-09-2007, 04:48 PM

I kinda remember seeing a pic of a tt setup by tomei, but it was for the sr...
thats pretty much all the help I got, LOL

NorCalEvo · 07-09-2007, 04:58 PM

slower than you- yeah man i messed up on my sig i just saw that i have to fix it. Thanks for bringing that up to my attention

adrians_s13- thanks for that info man, i will look into that hopefully i can find somthing there. Doesnt matter if it was for an SR just as long as i can get the general idea. I appreciate it alot.

azndoc · 07-09-2007, 05:10 PM

I say screw it just go KA24DETTT instead. I mean why screw around with just twin turbos.

GL

DOOK · 07-09-2007, 05:14 PM

i say turbo every cylinder

decco · 07-09-2007, 05:45 PM

Just get a VGT and forget about twin setup.

NorCalEvo · 07-09-2007, 06:00 PM

ha ha ha you guys are funny. I like the comedy. Seriously tho. this is something that i want to accomplish. I know its pretty ubsurd but hey its my dime, so hopefully someone can just help me out with some info and i can move on with this one.

adrians_s13 · 07-09-2007, 06:06 PM

Quote:

Originally Posted by Ltdnismoracer4

i say turbo every cylinder

msgl................................

jskateborders · 07-09-2007, 06:33 PM

not a very good idea, unless you have bank. one turbo will be way more effective. you would get crazy turbo lag trying to run two and you also have to worry about building the engine. A stock ka cannot hold more than like 8lbs(?) of booost

sikkk240 · 07-09-2007, 06:37 PM

Even when you do complete it. Itll be cool, but not practical at all.. the only reason for it to be done, is to say.. i have tt set-up on my ka.

Its already been done to.

http://www.rhombus-tuning.com/forums...php?f=30&t=348

GL though.
make a built thread.

Nikeboy355 · 07-09-2007, 10:11 PM

Rhombus is not messing around!...

I think the TT idea is not very efficient but if I were to try it I would use two SR T25s with the internal wastegates and see what happens...

Don't forget to get the exhaust pulsing correct...

NorCalEvo · 07-10-2007, 10:51 AM

sikkk240- thanks for the link man. that looks badass. Well its been done so i guess i better come up with something different. I appreciate the info. maybe i will be just like the others and go RB or something.

07-09-2007, 04:42 PM	#1
NorCalEvo Zilvia Member Join Date: Jun 2005 Location: Sacramento CA Age: 44 Posts: 264 Trader Rating: (1) Rides Gallery: NorCalEvo Feedback Score: 1 reviews	need help with my idea Hey guys. Ok so i have my S13 hatch right! I bought it with a twin cam swap already in it. Now here is my stupid/pretty sick idea. I want to twin turbo this motor. It is a regular Ka24de, Anyone know of or can get me together with someone that can fabricate me a manifold for this wicked idea. Yes i know that the money that i am going to invest in this idea would probably be better off just buying an SR or an RB, but i want to be unique and just see if it can be done. So any help or referencing information would be greatly appreciated. I figure 10K would cover the cost of parts and labor and stuff so if you think you can help then reply to this thread or PM me. Please Please Please dont hate on me for this one. I am just trying to go out on a limb here and see if it can even be done. I think it would be sick as hell to have something like this work out. Thanks in advance for any help that you can offer guys. Peace. __________________ Drifting it one corner at a time.

07-09-2007, 04:48 PM	#3
adrians_s13 Post Whore! Join Date: Jul 2005 Location: long beach, CA ^_^ Age: 40 Posts: 2,878 Trader Rating: (29) Feedback Score: 29 reviews	I kinda remember seeing a pic of a tt setup by tomei, but it was for the sr... thats pretty much all the help I got, LOL __________________ @adrianfromthecastle

07-09-2007, 04:58 PM	#4
NorCalEvo Zilvia Member Join Date: Jun 2005 Location: Sacramento CA Age: 44 Posts: 264 Trader Rating: (1) Rides Gallery: NorCalEvo Feedback Score: 1 reviews	slower than you- yeah man i messed up on my sig i just saw that i have to fix it. Thanks for bringing that up to my attention adrians_s13- thanks for that info man, i will look into that hopefully i can find somthing there. Doesnt matter if it was for an SR just as long as i can get the general idea. I appreciate it alot. __________________ Drifting it one corner at a time.

07-09-2007, 05:14 PM	#6
DOOK Post Whore! Join Date: May 2007 Location: Land of Milk and Cookies Age: 42 Posts: 7,552 Trader Rating: (3) Feedback Score: 3 reviews	i say turbo every cylinder __________________ <------ Grumpy Old Asshole MY REVIEW THREAD: Ltdnismoracer4=DOOK http://www.zilvia.net/f/showthread.p...ltdnismoracer4

07-09-2007, 06:00 PM	#8
NorCalEvo Zilvia Member Join Date: Jun 2005 Location: Sacramento CA Age: 44 Posts: 264 Trader Rating: (1) Rides Gallery: NorCalEvo Feedback Score: 1 reviews	ha ha ha you guys are funny. I like the comedy. Seriously tho. this is something that i want to accomplish. I know its pretty ubsurd but hey its my dime, so hopefully someone can just help me out with some info and i can move on with this one. __________________ Drifting it one corner at a time.

07-09-2007, 04:47 PM	#2
slower than you Zilvia Member Join Date: May 2007 Location: 707 vallejo Age: 37 Posts: 219 Trader Rating: (0) Feedback Score: 0 reviews	well, according to your sig you already did it deustchey mcdeustcher.

07-09-2007, 05:10 PM	#5
azndoc Post Whore! Join Date: Feb 2006 Location: Los Angeles Age: 43 Posts: 9,487 Trader Rating: (47) Rides Gallery: azndoc Feedback Score: 47 reviews	I say screw it just go KA24DETTT instead. I mean why screw around with just twin turbos. GL

07-09-2007, 05:45 PM	#7
decco Join Date: Feb 2007 Location: Richardson Age: 37 Posts: 42 Trader Rating: (1) Feedback Score: 1 reviews	Just get a VGT and forget about twin setup.

07-09-2007, 06:33 PM	#10
jskateborders Zilvia FREAK! Join Date: Apr 2007 Location: Tucson AZ Age: 36 Posts: 1,258 Trader Rating: (5) Feedback Score: 5 reviews	not a very good idea, unless you have bank. one turbo will be way more effective. you would get crazy turbo lag trying to run two and you also have to worry about building the engine. A stock ka cannot hold more than like 8lbs(?) of booost

07-09-2007, 10:11 PM	#12
Nikeboy355 Zilvia Addict Join Date: Mar 2004 Location: Los Angeles, CA Age: 45 Posts: 734 Trader Rating: (0) Feedback Score: 0 reviews	Rhombus is not messing around!... I think the TT idea is not very efficient but if I were to try it I would use two SR T25s with the internal wastegates and see what happens... Don't forget to get the exhaust pulsing correct...

07-10-2007, 10:51 AM	#13
NorCalEvo Zilvia Member Join Date: Jun 2005 Location: Sacramento CA Age: 44 Posts: 264 Trader Rating: (1) Rides Gallery: NorCalEvo Feedback Score: 1 reviews	sikkk240- thanks for the link man. that looks badass. Well its been done so i guess i better come up with something different. I appreciate the info. maybe i will be just like the others and go RB or something. __________________ Drifting it one corner at a time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode